The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

WPGM0206012M is a 12W Gallium Nitride (GaN) Monolithic Microwave Integrated Circuit (MMIC). WPGM0206012M is useful for various application as it is covering from 0.5GHz to 8.5GHz. Spec : Frequency : 0.5-8.5GHz Saturated Output Power : 19.5W@4GHz PAE : 22.49% Power Gain : 5.91dB@4GHz Operating Voltage : 48-50V Please contact WAVEPIA for more information.

Product Information Frequency signal generator for small target detection High-frequency resolution design and frequency conversion function using DDS method main performance Frequency: Ku-Band ~ Ka-Band Very Small Size, Pulse Mode Output Level: -5dBm min Spurious: -30dBc min Harmonic: -40dBc min Phase Noise: High Performance Frequency Sensibility: 50ppm max Port isolation: 50dBc Min Applicable fields Applicable to ultra-small guided weapon tower system and small radar system

A gimbal housing is a component that stabilizes and rotates the seeker of a guided weapon. It helps ensure the seeker can accurately aim at the target at all times, regardless of the guided weapon's movement.

This hydraulic tool package product is an ultra-high-pressure tool product used to assemble and disassemble major parts that make up the engine, and has been supplied to domestic and overseas engine customers since our foundation. The composition consists of a hydraulic pump, a hydraulic jack, a hydraulic hose, and a coupler, and supplies one package per ship. The product model can be selected according to the required pressure for each engine type and model.

Side shells, wing shells and fuselage structures are made of CFK, GFK, aluminium or organic sheets and get connected during production. Sealants are used to seal the connection surfaces. These are usually two-component polysulphides, which have to be applied in different geometries. Typical applications are: Fillet sealings, oversealings, interface sealings and seal caps. Due to their properties, polysulfides require very low pressure and shear handling. The compressibility of the fillers contained in the medium requires a high level of expertise and a coherent overall system from material removal to application. With manual application, long production times and high material ejection have a negative influence on the complete process. Complex quality standards are required due to the risk of human error. With the in-house developments of the vipro-DUOMIX from ViscoTec, this process can be depicted fully automatically. The individual nozzle design is also adapted to each application. The result is a controlled dosage in compliance with the specifications and at the same time the highest repeat accuracy.

It is a target drone that supports Live-fire training of various anti-aircraft weapon systems (Anti-Aircraft Gun, Guided Missiles, etc.) of the Army, Navy, and Air Force. Target drone take on the role of aggressor aircraft in training. When the target drone flies, the anti-aircraft weapon system participating in the training detects the target drone, conducts tracking training, and then conducts live fire to directly shoot down the target drone. In addition, we are developing services through anti-drone system (radar detection and tracking) performance testing and education/training based on the know-how and technology accumulated through live-fire training target drone operation services.