It is a system that performs missions such as monitoring, surveillance and reconnaissance by ejecting and launching a foldable fixed-wing drone from the canister(tube) launcher. It is equipped with EO/IR Cameras (Electro-Optical / Infra-Red), which are mission equipment for reconnaissance, so that effective day and night image information can be collected. The gathered image information is transmitted to the ground control system (GCS) in real time while detecting and tracking the target by applying AI-based image processing technology. The foldable fixed-wing UAV has a simple structure and light weight, so it can be stored and transported in the canister launcher, and can be operated immediately so that it can be operated without time delay, and if necessary, the air vehicle can be retrieved and re-used by using a net-type recovery system.

The SWIR & NIR 25-250mm f/5.5 (NFOV) f/4.0 (WFOV) continuous zoom lens is a first to market low-Size, Weight, and Power (SWaP), compact lens, for the newly introduced 5μm SXGA, as well as for 10μm SXGA, and 15μm VGA SWIR detectors. The SWIR & NIR zoom lens employs a unique mechanical and optical design, resulting in an all-around smaller and lighter unit with only 860gr in weight, and 224mm in length, making it approximately 60% lighter than similar existing SWIR lenses. The SWIR lens is also chromatically corrected to support a broader short-wave IR wavelength regime from 0.7-1.7μm and operates with minimal distortion. The SWIR & NIR 25-250mm f/5.5 (NFOV) f/4.0 (WFOV) continuous zoom lens presents an unrivaled combination of SWaP capabilities, detection range exceeding 26km. Product features: • Continuous zoom in the 0.7-1.7μm SWIR regime • Designed for 5μm, 10μm SXGA & 15μm VGA SWIR detectors • Lightweight (<860 gr) • Detection range >26 km • Enables laser-line detection

Main Characteristics Excellent broadband characteristics Radiation patterns virtually independent of frequency Only one antenna required to cover a wide frequency range Selectable polarization plane Sturdy construction Suitable for mobile use Main Use Optimized for radiomonitoring and measurements Design Owing to its broadband characteristics and the virtually frequency-independent radiation patterns, the SLP – 200M-001G covers a very wide frequency range The sturdy construction makes the antenna Suitable for stationary and mobile applications

We developed and optimized an object detection and tracking solution tailored for edge environments using Intel Atom platforms with OpenVINO. The system combines MobileNetV3-SSDLite for detection and MobileNetV3-Small for tracking, enabling efficient real-time performance on resource-constrained devices. Through model optimization and inference acceleration, we achieved over 2x improvement in FPS and more than 50% enhancement in inference speed, all while maintaining detection and tracking accuracy. This demonstrates the solution’s suitability for lightweight, low-power edge AI applications

[Cutting by water jet] Micro water jet cutting: The micro water jet enables a refined process to be carried out in precision cutting. This high-precision technology reduces the jet diameter by a factor of 5 and makes water jet cutting more precise by a factor of 10. The micro water jet achieves a cutting accuracy of +/- 0.01 mm and a positioning accuracy of ±0.005 mm. The proven advantages of the cold cutting process remain unchanged. In the pure water process, the cutting width was reduced to 0.2 mm in the abrasive process for hard materials such as nickel-based alloys and titanium. The new technology controls the cutting process and manipulates the cutting path depending on the contour and speed enabling a highly precise cut. Standard waterjet cutting: Water jet cutting is highly efficient and at the same time less severe than other cutting techniques. Low process forces and thermal loads prevent bending or melting. We can cut filigree delicate contours from practically all nickel alloys and titanium alloys. Using our standard process we can cut a range of shapes and dimensions according to customer requirements and drawings and achieve tolerances of +/- 0.1 mm or +/- 0.2 mm.

SURI-A is a compact design thermal sight based on high performance infrared detector meeting military grade requirement. It uses a lightweight un-cooled thermal imager and advanced optic providing soldiers a one-stop solution for reconnaissance, patrol and engagement, regardless of light and battle field conditions. It is a versatile, multipurpose sight that is compatible on a broad range of Fire Arms.

This explosive detector, built on a photochemical sensor, is a security device that detects traces of explosives by sucking in the surrounding air. It is scheduled for trial application at APEC 2025.

We bring all our skills and expertise to bear in product development and in-service support in order to meet our customers' needs: 3D drawings and design Aeroelasticity Thermal, CFD analysis Static and dynamic analysis Electrical/hydraulic/mechanical system design Cost-optimized design, cost-benefit analysis Parametric experiment design Optimization techniques and algorithms Multiphysics modeling Concessions management: control plan, extension of concession, design engineering office, concession justification, impact analysis (FMECA, process/design change, etc.), definition of a repair program, updating of certifications Flight physics Configuration management Design, calculation and modeling Composite or metallic parts