• Openable sleeves • Expandable sleeves • Convoluted conduits • Heat shrink tubing & sleeves • Heats shrink boots • Specific sleeves

Supports non-destructive inspection of aircraft composite skin structures and is composed of a piezoelectric layer sensor, data acquisition equipment, and damage analysis software. Utilizes piezoelectric sensors to generate Lamb-wave and acquire signals, collecting data to accurately detect and assess composite damage. Visualizes inspection results on display such as damage location, size and index. - POD Accuracy: 1 inch 90% or more - POD Precision : Position error within 30 mm - 64 channels / 230 path reference detection time within 10 minutes - Sensor : Resonance resistance less than 400kΩ - Sensor : MIL-STD-810G - Sensor : RTCA DO-160 Section 23.0 - DAQ : x128 Piezoelectric sensor interface

1. Filler Metal Name Material/Alloy AWS W-No. ISO-No. Nickel 61 Ni A5.14 ERNi-1 2.4155 SiNi2061 MONEL® 60 Ni-Cu A5.14 ERNiCu-7 2.4377 SNi4060 MONEL® 67 Cu-Ni A5.7 ERCuNi 2.8037 SCu7158 INCONEL® 72 Ni-Cr A5.14 ERNiCr-4 SNi6071 NC 80/20 Ni-Cr 2.4639 INCONEL® 82 Ni-Cr A5.14 ERNiCr-3 2.4806 SNi6082 INCONEL® 622 Ni-Cr-Mo A5.14 ERNiCrMo-10 SNi6022 INCONEL® 625 Ni-Cr-Mo A5.14 ERNiCrMo-3 2.4831 SNi6625 INCO-WELD® 686-CPT Ni-Cr-Mo A5.14 ERNiCrMo-14 SNi6686 INCO-WELD® 725NDUR Ni-Cr-Mo A5.14 ERNiCrMo-15 SNi7725 INCO-WELD® C-276 Ni-Cr-Mo A5.14 ERNiCrMo-4 2.4886 SNi6276 INCONEL® 52 Ni-Cr-Fe A5.14 ERNiCrFe-7 SNi6052 INCONEL® 52M Ni-Cr-Fe A5.14 ERNiCrFe-7A INCONEL® 92 Ni-Cr-Fe A5.14 ERNiCrFe-6 SNi7092 INCONEL® 617 Ni-Cr-Co-Mo A5.14 ERNiCrCoMo-1 2.4627 SNi6617 NILO® CF36 Ni-Fe INCOLOY® 65 Ni-Fe-Cr A5.14 ERNiFeCr-1 SNi8065 INCONEL® 718 Ni-Fe-Cr A5.14 ERNiFeCr-2 2.4667 SNi7718 Titanium Grade 1 Ti A5.16-90 ERTi-1 Titanium Grade 2 Ti A5.16-90 ERTi-2 Titanium Grade 5 Ti-Al-V A5.16-90 ERTi-5 Titanium Grade 7 Ti-Pd A5.16-90 ERTi-7 2. Electrodes Name Material/Alloy AWS W-No. ISO-No. Nickel 141 Ni A5.11 ENi-1 2.4156 ENi2061 MONEL® 190 Ni-Cu A5.11 ENiCu-7 2.4366 ENi4060 MONEL® 187 Cu-Ni A5.6 ECuNi 2.0838 ECu7158 INCO-WELD® A Ni-Cr-Fe A5.11 ENiCrFe-2 2.4805 ENi6092 INCONEL® 152 Ni-Cr-Fe A5.11 ENiCrFe-7 ENi6152 INCONEL® 182 Ni-Cr-Fe A5.11 ENiCrFe-3 2.4807 ENi6182 INCONEL® 112 Ni-Cr-Mo A5.11 ENiCrMo-3 2.4621 ENi6625 INCONEL® 122 Ni-Cr-Mo A5.11 ENiCrMo-10 ENi6022 INCO-WELD® C-276 Ni-Cr-Mo A5.11 ERNiCrMo-4 2.4887 ENi6276 INCO-WELD® 686CPT Ni-Cr-Mo A5.11 ERNiCrMo-14 ENi6686 INCONEL® 117 Ni-Cr-Co-Mo A5.11 ERNiCrCoMo-1 2.4628 ENi6617

Building on an unsurpassed legacy of success, GE continues to execute on bold technical initiatives to ensure even more demonstrable support to the warfighter and those in need of humanitarian relief.

Build Confidence from the ground up! Your partner for custom built exhibits - any trade show, anywhere in the world. From the initial brief to the last detail, our approach is simple: we’re hands-on partners and honest collaborators who listen, design, and build to your specifications — on strategy, on time, on budget. Turn heads with a custom-built exhibit from Kallman Creative Services. Take pride in owning an event destination that stops visitors in their tracks and jump-starts sales conversations. Custom Builds - Chalets - Pavilions - Corporate Events

A rotating component designed to accelerate and direct airflow gas within the engine.

CoaXPress enables bidirectional transmission of data transfer, camera control, power supply (PoCXP), and triggering over a single coaxial cable. This product supports the following transmission standards. Designation Bit Rate ========== ======== CXP-1 1.250 Gbps CXP-2 2.500 Gbps CXP-3 3.125 Gbps CXP-5 5.000 Gbps CXP-6 6.250 Gbps CXP-12 12.500 Gbps The CXR-4C amplifies and transmits image signals from 1/2/4-channel CoaXPress cameras to a PC frame grabber. Typically, transmission matches the distance between the camera and the device. Transmission distance depends on the coaxial cable type, and due to significant variability, specific distances are not provided.  4 CH x 1 Camera Configuration  2 CH x 2 Camera Configuration  1 CH x 4 Camera Configuration  2 CH + 1CH Camera Configuration

In addition to stocking common grades, shapes and sizes, PASU has a full inventory of nonstandard sizes. Progressive’s multiple value-added processing capabilities provide the ability to supply near-net products resulting in reduced machining time. From 2 stocking locations (Hartsville, South Carolina & Las Vegas, Nevada) the company efficiently supports the North American market, with close proximity to international airports and major shipping ports on the east & west coast of the USA providing exceptional service to the global market. Progressive’s AS9100D Certified quality system is complemented with many major OEM Approvals including Pratt & Whitney - LCS. Specialty products include round bar, flat bar, plate & forgings in the following alloys: 17-4PH & 15-5PH 13-8MO 13-8 Supertough® 4340M (300M), 4330M, 4340 VAR Cronidur 30® Custom 455® & Custom 465® 440c & 440c VAR Value added processing capabilities include: Production cutting up to 22" diameter Plate processing up to 24" x 72" x 170" Waterjet cutting & near-net shape processing Grinding, trepanning & gun drilling Heat treating, destructive & non-destructive testing