The QRS116 is a compact angular rate sensor ideally suited for applications in tactical, aerospace and mission-critical instrumentation. The QRS116 features exceptionally low noise, fast start-up, and a simple electrical interface, the QRS116 has no moving parts ensuring long service life and high MTBF. System Performance PARAMETERS SPECIFICATIONS Standard Ranges ±100°/sec Input Voltage + 5 Vdc ±5% regulation Short Term Bias Stability (100 sec at const. temp) 3 deg/hr Output Noise ( DC to 100 Hz) ≤ 0.002°/√Hz* * Values Indicated are for ±100°/sec. Range Features Exceptional Bias Stability Unprecedented Low Angle Random Walk Values Superior Vibration Performance Compact Industry-Standard Package (Same as QRS11) Rugged, Compact Package Integrates easily Applications Tank Turret Stabilization Defense Fixed Wing Defense Helicopter Unmanned Aerial Vehicles UGV – Unmanned Ground Vehicle Platform Stabilization Camera Stabilization Antenna Stabilization ROV – Remotely Operated Vehicle

SAR satellites are designed for change detection and our unique Dwell, Spot, Strip and Scan modes give you the flexibility to monitor very large areas and zoom in to areas of interest at ultra-high resolution as needed. Get unprecedented visibility and flexibility with Dwell, Spot, Strip and Scan imaging modes. Monitor areas up to 50,000 km² and zoom in to areas of interest at very high resolution down to 50 cm – day, night and in any weather

- Ultimate Situational Awareness capabilities - Indication & warning of hostile activities - Designed for the modern battlefield challenges - Targeting - Homeland security and border protection

Wing shells, side shells and fuselage sections are usually made of carbon fibre composites and glued together during the production process. With many components, a groove or an open edge remains after the bonding process, which must be filled or sealed. A modified two-component epoxy resin is often mixed and then applied manually. This often entails long production times and complex quality controls. Equally high material costs due to the processing of materials from cartridges. ViscoTec defies short pot life and materials that are difficult to handle: Thanks to a coherent overall system from material removal to material application, this process can be automated. The two components are taken separately from cartridges, hobbocks or drums and fed via hose lines to a two-component dosing system. Only at the very end of the process they are mixed in a static mixing tube and applied to the substrate (e.g. via a nozzle). The process is controlled and monitored by pressure sensors.

It is especially suited for demanding applications, which require reliable performance, such as missile seeker gimbal stabilization, where small size and low power consumption is required, while in a low cost design that is also ideally suited for high volume commercial applications. System Performance PARAMETERS SPECIFICATIONS Standard Ranges ±100°/sec, ±200°/sec, ±400°/sec Input Voltage + and - 5.0 Vdc Bandwidth 110 Hz Output Noise < 005°/sec/√Hz Scale Factor Accuracy ±1% Nominal Features Dual Axis Capabilities in Small Form Factor Miniature Size: Only 25gm.(1.05” x 0.71” diameter) Hermetically Sealed In Stainless Steel Cylinder High Reliability DC Input/High-Level DC Analog Output Low Cost Applications Tank Turret Stabilization Missile Targeting Platform Stabilization Antenna Stabilization Camera Stabilization Spacecraft

Missions is the only commercially available analysis tool which brings together aircraft definition, aircraft performance and cost investigations in a single environment and delivers reliable projections of key metrics such as payload capacity, maximum range and direct operating cost. Excellent runtime performance and the integrated analysis environment ensure fast results even when dealing with large route networks.

Titanium Grade 1 Strip Titanium Grade 2 Bars-Sheets and Plates-Tubes and Pipes Titanium Grade 5 ELI Bars-Sheets and Plates Titanium Ti-6Al-7Nb Bars