Hydraulic top bracing is an attenuation device installed between the main engine and the hull of the ship to reduce thermal expansion and vibration from the main engine to natural frequencies. The operating principle is an automatic control operating system through in/out and on/off the operating range of the hydraulic top bracing according to the rpm of the main engine. The number of hydraulic cylinders per engine is typically 2, 4, 6 depending on the type of engine, up to 8 are installed if necessary, and 1~2 of control panels are installed.

A wire harness in military or aerospace applications is an assembly of wires, cables, connectors, and protective components designed to organize and route electrical and signal connections efficiently

Drone Hunter XD is a handheld anti-drone solution that can quickly detect, identify, and track drones, providing swift onsite responses to drone threats within a 360-degree range of over 2km. Drone Hunter XD effectively neutralizes the frequencies of either a single drone or multiple drones approaching the blind spots of a fixed-type jammer, due to its receiving real-time access to information on detected DJI Drones, including S/N, model number, frequency band, azimuth/altitude angle, speed, and location.

The R10s is a reconnaissance and surveillance drone capable of conducting up to two hours of mission flight, transmitting real-time information such as target location and scale to the ground control system. Based on the company’s innovative vertical take-off and landing (VTOL) platform “Bluebird,” the R10s is equipped with EO/IR optical sensors and a laser range finder for advanced target detection. Upon receiving mission orders, the R10s takes off vertically, transitions to fixed-wing flight, and proceeds to the designated area. Its onboard cameras and sensors identify and track targets, relaying precise coordinates to the ground control system. With modular wing replacement, the R10s can be configured for extended endurance of around two hours or for high-speed maneuverability, ensuring optimal adaptability and mission effectiveness across diverse operational scenarios.

- Lens cover device: protects the lens from stones and other foreign objects - Manual opening/closing device: allows manual operation in case the automatic mechanism fails due to foreign object blockage or freezing

With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

Micro-D Twinax Connectors (MDTX) offer Twinax blindmate assemblies fitted into a low-profile metalized Micro-D style shell, high speed signalling capable of 100 Ohm differential pair matched impedance, maximum space utilization, ultra miniature size and high vibration capability, extremely light weight and modular with true signal integrity.

The compact MD89MW-DroneCAN is a 13mm, metal gear, sub 1 oz micro servo with dual ball bearings, coreless metal brushed motor, and contactless magnetic encoder. This discrete package offers high performance and reliability for robotic and remote, unmanned aerial applications where space and weight are at a premium. Operating via DroneCAN (formerly UAVCAN) control at a wide voltage range from 4.8~7.4 volts, the unique MD89MW actuator produces impressive performance, with torque and speed numbers equal to servos weighing twice as much from just a few years ago. #UAV #UAS #UGV