The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

Rugged 2mm backplane connector system is a compliant PICMG Compact PCI standard solution that provides engineers with an advanced interconnect system to address the requirements of mission-critical applications within commercial aerospace, space and defense market segments.

Active phased array fire control radar (AESA) for aircraft A fire control multi-function radar (MFR) that can simultaneously detect, identify, and track multiple targets, including in the air and on the ground, and has SAR and NCTR functions. Aircraft (fighter)-mounted AESA radar is a core sensor for fighter jets to perform day/night/all-weather multiple missions. It operates in multiple modes such as air-to-air/air-to-ground/air-to-sea/support mode, and acquires ground images and air/ground in electronic warfare situations. It is essential mission equipment for fighter jets that detects/tracks multiple targets and supports guided missile guidance and gun shooting.

The new Super-TAC IMU integrates three fiber optic gyros that exceed tactical grade performance with three high-accuracy Micro-Electro-Mechanical Systems (MEMS) accelerometers and state-of-the-art support electronics in a single small, lightweight package. This solution addresses the need for superior inertial performance in a tactical- grade package, critical for operation in GPS denied and contested environments. The Super-TAC IMU measures change in velocity and angle, utilizing a configurable variable synchronous data link control (SDLC) digital serial bus. The Super-TAC is configured to offer customers the best value solution when designing new systems as well as provide the flexibility to upgrade existing platforms. The Super-TAC IMU employs state-of-the-art optics with fewer components, providing significant performance and reliability improvements across standard military environments. Background Emcore, located in Budd Lake, NJ has been designing, developing and producing inertial components, sensors and navigation systems for Space, Ground, and Avionic applications for over 35 years. Emcore has been developing Fiber Optic Gyros (FOGs) since the early 1990s, producing and delivering IMU products with performance ranging from tactical to strategic grade PERFORMANCE GYRO PERFORMANCE Bias Stability < 0.05 °/hr. (1σ) Angle Random Walk ( ARW) ≤ 0.01 °/√hr. (1σ) Scale Factor Repeatability ≤ 100 ppm (1σ) Scale Factor Linearity ≤ 50 ppm (1σ) Angular Rate Range 1,000 °/sec Acceleration Range 100,000 °/sec2 ACCELEROMETER PERFORMANCE Range ± 25 g Bias Variation ≤ 50 μg (1σ) Scale Factor Stability ≤ 300 ppm (1σ) SYSTEM PERFORMANCE Bandwidth (adjustable) 800 Hz (gyros) 150 Hz (accelerometers) MTBF >25,000 hr.

SAT-PRE establish emergency communication networks for communication-disrupted areas during natural disasters and catastrophes. SAT-PRE ensures communications between commands in deepest operational areas and also between team members. it maximized communication success in adverse terrain, weather and other terrible conditions. The rate of transfer success is over 90%. The implementation of various communication methods such as voice PTT, automatic location reporting, and specialized transmission and reception using satellites as we reflects the latest technology based on Iridium 2nd generation satellites. The mission control center's CL-700 receives information transmitted from the operational area SAT-PRE in real time for up to 1,000 units and shares on-site situations by linking with other systems.

The SBC3612D is a rugged 3U VPX single board computer aligned with the compute-intensive SOSA profile, delivering high-performance processing with the Intel® Xeon® D-2775TE 16-core processor and flexible expansion capabilities. • Supports up to 64GB DDR4 SDRAM and 480GB NAND Flash (NVMe SSD) • Offers 100GbE and 10/25GbE data plane and control plane support • Features the Xilinx® Zynq® UltraScale+™ MPSoC FPGA for enhanced security

Kia developed Granbird Bare Chassis Vehicle based on long-accumulated technology and infrastructure for commercial vehicles. This Granbird Bare Chassis vehicle can be easily modified as specialized vehicles on the basis of diverse customer requirements.

The eco-friendly era, it all begins with the Energy Storage System. VITZROCELL's EDLC is a next-generation energy storage device that offers a high energy density and can be used semi-permanently.