With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

ts advanced integrated optics and closed-loop Field Programmable Gate Array (FPGA) electronics deliver much higher accuracy, lower noise and greater efficiency than competing technologies. In addition, the EG-1300 can be calibrated internally for better thermal effect and has both digital and analog outputs, along with separation of the electronics from the FOG’s sensing coil assembly to accommodate the widest variety of installation parameters. Features Fully-integrated optics and electronics Advanced optics and FPGA electronics for higher accuracy, lower noise and greater efficiency Precise navigation (1 mile/hour without GPS) Fast, precise gyrocompassing to 1 milliradian Bandwidth to 500 Hz Separate electronics and sensor modules More economical than competing systems Applications Navigational grade applications Unmanned aerial vehicle (UAV) guidance Missile guidance Aeronautics and aviation Robotics

The ACTUS® PARA-3M is a mission-critical magnifier designed for rapid and precise targeting of close- to mid-range threats in high-intensity operational environments. With a 3x magnification, it enhances accuracy and adaptability, ensuring superior performance in dynamic combat situations and supporting both near and long-range precision shooting for mission success.

We lead the latest technology trends with innovations in design and thickness. VITZROCELL's Thin film batteries are thin and flexible sheet-type batteries with various shapes and thicknesses.

MPS linear actuators are very compact, offer outstanding precision and can be adapted to the most demanding environments. The ball screws that make up these actuators give them a smooth, stick-slip-free linear motion. The diameter, motor, screw type and other elements of the linear actuator can be configured to your requirements.

The DLR exhibit "Maritime Situation Image" at the Seoul ADEX 2025 uses a VR presentation to illustrate how the use of maritime situation images can be utilised for the protection of maritime infrastructures. Three subject areas are presented and explained: the ‘SeaCat’ autonomous underwater vehicle (AUV) concept on object detection in the underwater area, the topic muon tomography, i.e. the use of cosmic radiation (muons) for the tomographic examination of objects such as freight containers, and Distributed Acoustic Sensing (DAS) on the detection of ships and submerged objects using fibre optic cables on the seabed.

- RWR receiver inspection and antenna performance measurement - EW receiver inspection - Check the azimuth and signal power of the RWR receiver

- Within the aircraft exterior inspection system, data aggregation and transmission are provided. - Data collection and storage via the server are provided. - User authentication and other system management are provided. - User interfaces are provided for administrators.