The Fibre Channel D-sub connector series features a multi-finger ground spring fixed around the shell provides a multi-point contact engagement that affords superior EMI shielding. The end result is extremely low contact resistance when measured from the contact outer body to the connector flange. The Fibre Channel D-Sub series also delivers superior performance ensuring minimal RF noise and high durability up to 1,000 mating cycles, while meeting and surpassing all requirements of MIL-STD-202 for shock and vibration. Offered with 150 Ohm quadrax contacts, the connectors are available with 2, 4, 6 or 8 way insert arrangements. Additionally, D-Sub connectors feature ease of assembly, and a robust and comprehensive training package. To ensure that the correct high speed connectors are mated to address specific wiring requirements and keying functions, a keyed jack post option has been incorporated into the design. The six-positioned post allows for 36 possible keying combinations assuring that the correct Fibre Channel D-Sub plug is mated to the correct high speed receptacle. Non-keyed jack post versions are available as well. Fibre Channel D-Sub connectors feature size 3 quadrax contacts which are 30% larger than the size 9 configuration utilized in the 100 Ohm quadrax, ensuring a matched impedance signal throughout the contact mated pair at 150 Ohm differential impedance. These features ensure that Smiths Interconnect's Fibre Channel D-Sub connectors deliver the critical edge customers require.

Nara Space’s first standard nanosatellite for Earth observation constellations with 7 optical bands and 1.5 m GSD. Launched November 2023 to the 525 km of the orbit, it has 2 years Mission Lifetime.

The SC-SBCRTM-V2 is a Rear Transition Module (RTM) designed to extend the I/O functionality of the SBC6511 single-board computer. Mounted on the rear side of the main VPX backplane, this module provides additional I/O expansion through Micro-D and D-sub connectors for synchronization signals, two Ethernet ports, two Mini-DisplayPort video outputs, two USB interfaces, and MMCX connectors. It enhances system flexibility and connectivity for embedded and radar signal-processing applications.

Main advantages of the PBS ECS systems include the possibility of cooling, heating and ventilation in one system, minimal power consumption, ecological operation without the need for a coolant and a compact design. Specific applications of the ECS systems include light combat aircraft AERO L-159 ALCA, jet trainers AERO L-39NG and L-39 Albatros, etc.

Features - Excellent waterproof performance with double sealing structure. - Beam expansion application technology application. - Can be applied to deep-sea environments. Application Area - ROV (Remotely Operated Vehicle) - Underwater Optical Communication - Renewable Energy - Underwater Drone

The low profile MD145MW-DroneCAN is a 10mm, metal gear, sub 1 oz servo with dual ball bearings, cored motor, and contactless magnetic encoder. This discrete package offers high performance and reliability for robotic and remote, unmanned aerial applications where space is at a premium. Operating via DroneCAN (formerly UAVCAN) control at a wide voltage range from 4.8~7.4 volts, the unique MD145MW-DroneCAN servo produces impressive torque and speeds in its class. #UAV #UAS #UGV

KVPX+ Series is an embedded interconnect system that provides unrivaled performance in harsh environments while adapting to the VITA standard design requirements. KVPX+ Series is a shielded, high-density, high-speed, modular interconnect system optimized for differential pair architectures on a 1.8mm x 1.35mm grid.

CoaXPress enables bidirectional transmission of data transfer, camera control, power supply (PoCXP), and triggering over a single coaxial cable. This product supports the following transmission standards. Designation Bit Rate ========== ======== CXP-1 1.250 Gbps CXP-2 2.500 Gbps CXP-3 3.125 Gbps CXP-5 5.000 Gbps CXP-6 6.250 Gbps CXP-12 12.500 Gbps The CXR-4C amplifies and transmits image signals from 1/2/4-channel CoaXPress cameras to a PC frame grabber. Typically, transmission matches the distance between the camera and the device. Transmission distance depends on the coaxial cable type, and due to significant variability, specific distances are not provided.  4 CH x 1 Camera Configuration  2 CH x 2 Camera Configuration  1 CH x 4 Camera Configuration  2 CH + 1CH Camera Configuration