The LSH rack and panel high power connector series from Smiths Interconnect is utilized across many different market segments including aerospace, automotive, industrial, test and measurement, and mass transit. The foundation upon which the LSH is built is the leading-edge Hypertac® hyperboloid contact technology. This world class interconnect technology ensures LSH connectors are immune to shock, vibration and fretting. In addition, they feature low insertion and extraction forces that are a catalyst for easy mating relative to their contact size. The LSH Series delivers customers a contact life that can be maintained for up to 100,000 mating cycles and at an extremely low cost of ownership.

V-BAT은 전투 검증을 마친 플랫폼으로, 유사한 성능의 Group 4 및 5급 대형 무인기 대비 비용과 물류 부담을 획기적으로 절감하면서, 전략 및 전술 수준의 ISR(정보 수집·감시·정찰)과 표적 획득 기능을 제공하는 기동성 중심의 운용 플랫폼입니다. 전자전 환경을 고려해 설계, 시험, 실전 배치된 V-BAT은, GNSS 차단 및 통신 간섭 상황에서도 임무 수행 효과성을 실전에서 입증한 바 있습니다. V-BAT은 미 해안경비대(Maritime UAS Services Program)의 공식 채택 플랫폼으로 선정되었으며, 미 해군의 거의 모든 함정과 해병대 전진기동부대(MEU) 전 편대에 실전 배치되었습니다. 독자적인 설계 및 제어 기술을 통해, 강풍, 혼잡한 비행 갑판, 이동 중인 함정 등에서도 4.6m x 4.6m 수준의 협소한 공간 내 이착륙이 가능합니다.

For electrical and electronic signal connections inside and outside the hermetic equipment, it reliably protects the device from extreme temperature/humidity changes, vibration and physical/chemical effects, and transmits signals and currents without loss. These connectors use special glass or ceramic as insulation and are used in furnaces, power breakers, submarines, gas control systems, transformer safety devices, etc. Key features of closed connectors: It completely blocks the interior from the outside environment to keep it vacuumed or pressurized. Durability: It works reliably in extreme environments (high temperature, low temperature, humidity, chemicals, etc.). Electrical performance: It delivers electrical signals or power without loss.

< Frequency Range > ● LB-400: 400 ~ 460MHz ● LB-900: 800~928MHz ● MB-1500: 1300~1500MHz ● MB-2400: 2400 ~ 2500MHz ● HB-5.2: 5150 ~ 5250MHz ● HB-5.8: 5725 ~ 5875MHz < TX path output Power (at antenna port) > ● Normal mode: 35dBm [min] ● On each antenna port 2x 35dBm ● Interference mode: 40dBm [min] < TX path maximum Input Power > ● +20 dBm < RX path Gain > ● 25dB typ. < RX path Noise figure > ● Low bands: 3dB max. ● High bands 3.5dB max. < RX path IIP3 > ● -10dBm typ. < RX IP1dB compression point > ● 15dBm typ. < Power Supply > ● +24V ± 1 Vdc

A device that integrates and displays comprehensive navigation information for submarines, enabling operators to control various navigation sensors and systems while supporting mission execution. - Compliant with MIL-SPEC standards (shock, vibration, temperature/humidity, EMI/EMC) - Mechanically engineered design for improved maintainability

From multi-mission remotely piloted aircraft to sustainment, training, and support services.

Our MDB1200WP industrial actuator offers a contactless magnetic encoder, brushless motor and IP67-certified water & dust-proof protection, making it suitable for many demanding industrial applications. This 30mm powerhouse delivers over 1500 oz-inches of torque at 7.4V and features an aluminum alloy case to dissipate heat, two ball bearings and five hardened steel gears, and PWM control protocol. Program numerous parameters to optimize the installation and performance for your industrial applications. #UAV #UAS #UGV #UUV #USV

The static-dynamic mixer vipro-DUOMIX is perfectly suited for compressible, two-component materials – with very different viscosities, extreme mixing ratios and high-pressure sensitivity. The extended version with optimized mixing blocks for low-viscosity, and high-viscosity materials on either side brings a further advantage: It is ideally suited for materials that are difficult to mix – with different or identical viscosities. A modular design with five different dispenser sizes per side allows complete flexibility. And a wide range of mixing ratios from 1:1 to 100:1. The vipro-DUOMIX can be used for complex two-component applications in diverse industries such as automotive manufacturing, aerospace, or electronics. Irrelevant of whether it is for a dot dispensing, a bead application or for a potting application. Particularly in the production of aircrafts the static-dynamic mixer is used for honeycomb potting or for edge sealing. Special nozzles with adjustable bead width are available for this purpose. A wide range of two-component materials based on e.g., polyether, epoxy resin, silicone or polyurethane can be dispensed in all areas of application. Due to the parallel alignment of the dispensers, and due to a weight-optimized design, the vipro-DUOMIX is very compact – ideal for assembly in robotic cells or for automated applications.