Long-Endurance VTOL Aircraft with an Aerodynamic Design for Maximized Energy Efficiency. Equipped with Communication Systems and EO/IR Surveillance Cameras, it can fly up to 3 Hours of Mission Operation. Comes with a EO/IR Camera as Standard, and can be customized to carry payloads such as a Surveying LiDAR or Camera (≤1kg) based on customer requirements. Application : Take off/Landing on Moving Vessels, Aerial Surveying, Reconnaissance, Payload Drop (Grenade, Cargo, etc.)

The APG-63(V)3 AESA radar provides powerful, adaptable radar technology, proven performance, and tactical flexibility that F-15 pilots can rely on. Available for F-15C and F-15E aircraft, it continues a tradition of innovative, highly reliable technology. Superior situational awareness is a key benefit of this all-weather, multimode radar.

We have taken the standard housing configuration of the P1 & P3 mounting dimensions while incorporating true differential pair contacts within the P1 & P3 dimensional constraints. P1 connector housing contains 21 position true differential pair blind mate contacts allowing board designers to carry high density differential pair signals from the LRU via motherboard to daughter-card plug in modules with a single connector P1 type housing.

Discover why GE's Passport engine is B-52 ready.

PELICAN-D JT is a MWIR detector for missile applications. The FPA is InSb based, having digital Readout Integrated Circuit (ROIC) in a format of 640 x 512 with 15μm pitch. Pelican-D JT has a unique structure of Dewar which enables very fast cool down time and hence quick mission readiness using Joule-Thomson (JT) cooler. Due to the low heat load on the focal plane, the detector achieves long mission duration. The Detector can be supplied with a proximity board which provides Camera Link interface to the customer system. This highly simplifies the integration of the detector to the system.

- Installed on the fuselage or tail to provide flash lighting in a location that does not impede the visibility of position lights - The reflector rotates in an arc. - Flash Rate : 40 to 100 times per minute [cycle] - Effective Intensity : FAA FAR 29.1401 - SAE ARP 5825A

Purposed for people carrying two or more radios (JTAC, LEADER, RTO, etc) Removable shoulder & waist straps can be adjusted to fit the end-user without removing the rack Attaching to select tactical plate carriers with the QASM buckle system or using stand-alone with H Harness Small 4-way stretch Tweave general purpose pouch (Qty.1) Magazine pouches for 5.56mm or 7.62mm mags (Qty. 2) PRC-152A or 148 radio pouches (Qty. 2) Removable antimicrobial/FR treated spacer mesh pad Compatibility : PICO-DSX, PICO-DS, PICO-MBAV, EPIC-FED, EPIC-LOC-MOL & EPIC-DSX Composition Material : 500D Cordura® + ARAMID / PV® Color : MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

SAF-FIRES™ is a standards-based, image generator agnostic, and scalable Call-For-Fire and Close Air Support training simulation with autonomous Smart Trainer suitable for deployment in Joint Fires and accreditable JTAC training simulators. Built upon the same Call-For-Fire and Close Air Support software engine that powers the accredited simulation Fires FST™, SAF-FIRESTM delivers the same mature and complete Joint Fires training solution but makes it available for integration with any DIS, HLA or CIGI compatible simulation or Image Generator. Supporting both conventional near-peer and counter-insurgency operational scenarios, SAF-FIRES™ enables JFOs and JTACs to train realistically in a modern complex battlespace against an agile and adaptive adversary. Heightened realism and cognitively challenging training are enabled through the incorporation of non-combatants, urban clutter, UAV surveillance, various close air support platforms and accurate military targeting procedures.