- Dimensions (L x W x H): 40 x 90 x 35 mm (receiver + antenna array) - Weight: 120g (receiver + antenna array) - Power Consumption: 3W - Constellations: GPS, Galileo, GLONASS, BeiDou, NavIC - Frequencies: L1/L5 or L1/L2 - Interference Resistance: Single jammer up to 90 dB (J/S)

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The CLR-30 amplifies and transmits Camera Link signals in Base/Medium/Full configurations (up to 10 Taps supported) from a camera to a PC frame grabber. Key Features  Fully supports the Camera Link interface (Area/Line Scan).  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL).  Supports pixel frequency from 20 to 85 MHz.  Supports 10 Taps cameras.  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Supports PoCL signal bypass (patented).  Features a locking DC power jack (Molex) and SDR connectors.  Compact size compared to previous models.

K2 online mall

Designed on MPS Microsystems’ modular optomechanics platform, the High-Speed Coaxial Lens Actuator delivers custom-engineered, micron-level alignment in a footprint of just 170 × 87 × 45 mm. Two brushless motors drive lens holders (Ø 12.7 mm) that move in the same precision-machined bore, guaranteeing perfect coaxiality throughout the 3.75 mm stroke and no shimming or iterative alignment required. The closed-loop cam mechanism runs friction-free, ensuring a maintenance-free stage that can be used in laser machining heads, spectrometers or 3-D scanners and keeps working for millions of cycles. Most importantly, stroke, motor, encoder and mounting interfaces of this high-speed coaxial lens actuator can all be customized to fit your needs with regards to optical and space constraints.

The DA 15‐N is our smallest and lightest full brushless actuator. Its brushless motor and contactless, wear-free position sensing system makes the DA 15‐N immune to wear, vibrations and shock loads. It has especially been designed for usage in harsh environments and for safety-critical applications that require an actuator with high endurance. The conductive aluminum case and the shielded connection cable are reducing the susceptibility to any kind to EMI/RFI noise to the absolute minimum. The servo features position, temperature and current feedback as a standard and is fully programmable.

Processor - NXP Quad Core PowerPC QorIQT2080 up to 1.8GHz - 6 DMIPS/MHz per core (up to 43,200 DMIPS@1.8GHz) - 128b AltiVecSIMD unit (up to 72 GFLOPs@1.8GHz) Memory - 4GB soldered 64-bit DDR3L SDRAM with ECC - 256MB 16-bit NOR flash - 64GB SATA NAND SSD - 512KB NvRAM Form Factor - 3U OpenVPX - Conduction-Cooled

The Series 23 SuperNine® advanced performance MIL-DTL-38999 connector series provides many of the technology advances exceeding MIL-DTL-38999 Series III. Higher mating cycles, integrated banding porch, PC Tail and standoff availability and crimp termination Hermetics are all part of the family.

We are an EASA-certified APU manufacturer. To date, we have installed more than 7,000 PBS APUs. This APU includes completely new combustion chamber, new control unit allowing allow non-operating altitude up to 8,000 m AMSL. Redesigned fuel system. Continuous operation for 6 hours. Exceptional reliability. Start up to 6,000 m