- The 2nd generation mightyZAP series supporting dynamic speed & current control as well as position control along with position & current feedback - Built-in drive circuit, position sensor, 12mm diameter coreless DC motor and gear box - 27/40/53/90mm stroke option - Rated Load of 12N ~ 100N according to gear ratio for each stroke (Speed is inversely proportional to Rated Load, so the stronger the Rated Load, the slower the speed.) -Support RS-485 or TTL / PWM communication * TTL / PWM communication version operates by automatically recognizing the input TTL / PWM signal * When using PWM communication, only the position command is available without position feedback (For feedback feature, use TTL or RS-485 communication) Both MODBUS RTU and IR open protocols available (Default : IR Open protocol)

The mighty Hitec SG33BLT Series servo actuators operate on DroneCAN (formerly UAVCAN), CAN 2.0 A/B, RS485, PWM and TTL command protocols, and feature brushless motors, magnetic encoders, and hardened steel gears. They are also environmentally sealed with an IP67 waterproof case rating. The SG33BLT Series was initially developed for the automotive industry requiring minimal support equipment and wiring, saving unnecessary installation complexity, cost and weight. This same functionality is now enjoying widespread adoption of CAN and DroneCAN systems within the UAV environment. With options for both 9~15-volt and 18~32-volt operations, and DB9SUB, Circular, & Gland Cable connectivity, the SG33BLT Actuator Series is sure to have a solution for your needs. #UAV #UAS #UAM #UGV #UUV #USV

For electrical and electronic signal connections inside and outside the hermetic equipment, it reliably protects the device from extreme temperature/humidity changes, vibration and physical/chemical effects, and transmits signals and currents without loss. These connectors use special glass or ceramic as insulation and are used in furnaces, power breakers, submarines, gas control systems, transformer safety devices, etc. Key features of closed connectors: It completely blocks the interior from the outside environment to keep it vacuumed or pressurized. Durability: It works reliably in extreme environments (high temperature, low temperature, humidity, chemicals, etc.). Electrical performance: It delivers electrical signals or power without loss.

Features & Benefits: Drop-in enhancement for the T55-714A with very minor aircraft changes for deployment facility. Responsive to U.S. Army maintainer feedback, converting on lessons from current CH-47 engine. Upgrade Kit easily installed during overhaul.

Features NO MELT, NO DRIP (50/50 Nylon Cotton) Ergonomic design for comfort fit Velcro® patch attachment on sleeves Long sleeves with reinforced elbows Reliable components (YKK military zipper, etc.) Composition Sleeves: Nylon 50%, Cotton 50% Body: Functionalized Polyester, Polyurethane Size 95 ~ 115 Colors MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

Quadro Versa expands the capabilities of Exolaunch's microsatellite separation systems with a four-point offering tailored to satellites weighing up to 1000 kg and flying on SpaceX Rideshare plates. Versa has been designed for compatibility with the SpaceX four-point interfaces, and it is easily scalable to any size from 24”x24” up to 40”x40”. Larger satellites over 1000 kg and with larger footprints are also served by Versa, which offers unrivaled strength, stiffness and reliability for four-point satellites of any size.

It is a hybrid-powered(Engine + Generator) multicopter system that significantly overcomes the limitations of short flight times typically associated with battery-powered drones. It can carry up to 10 kg of mission equipment and perform operations for up to 2 hours, with the capability to autonomously land on moving vehicles and naval vessels. Its versatility is further enhanced through the development of various mission equipment, making it suitable for multipurpose applications.

JWGE connector which was derived from the VG95234, was developed for low-voltage/high-current transmission and, when combined, exhibits IP68 water and dust resistance, also exhibiting excellent durability and mechanical performance in a temperature range of 55° to +125°C. These features are applied and utilized in military vehicles and various industrial equipment.