The EPNR1000 is a drone-mounted 5G base station integrating CU-DU-RU, with 5G Core and an IP-PTT application server built in. All 5G network elements are combined into a single unit, allowing standalone operation (IOPS). Mounted on a drone, it can provide line-of-sight coverage over obstacles like buildings or mountains, making it an ideal system for delivering 5G services over wide areas during disasters or military operations.

EMCORE’s exclusive photonic integrated chip (PIC) technology delivers improved reliability and repeatability. The precision non-ITAR GEO-FOG 3D Dual features two GNSS antennas on a fixed PTK baseline to offer increased heading, pitch, and roll accuracy for static and dynamic applications where a single antenna system can be problematic. This dual antenna INS is the best choice for systems requiring heading at start-up or in low dynamic conditions. Highlights Data rate 10x faster than other available systems Cutting-edge sensor fusion for dependable, precise navigation in a full array of applications and conditions Six degrees of freedom (DoF) IMU with integrated gyros and accelerometers Technology Details Photonic Integrated Chip Technology EMCORE’s new photonic integrated chip (PIC) technology reimagines FOG technology by replacing individual fiber components with an innovative integrated planar optic chip. This results in a FOG with PIC Inside™ that’s even more reliable and delivers superior repeatability unit-to-unit. With three of these integrated photonic gyros at its core, the P-1750 IMU enables the GEO-FOG to provide the safe, accurate performance autonomous platforms demand. Learn More DSP Technology EMCORE’s DSP electronics improve FOG performance in critical areas such as scale factor and bias vs. temperature, scale factor linearity, and maximum input rate. EMCORE’s exclusive DSP design overcomes the limitations of analog signal processing, eliminating temperature-sensitive drift and rotation errors. GEO•FOG Manager The GEO•FOG Manager is ideal when integrating EMCORE’s GEO•FOG 3D and GEO•FOG 3D Dual INS. Learn More Developer’s Kit for Rapid Integration The KVH FOG/IMU Developer’s Kit includes easy-to-use software to accelerate your IMU and FOG integration, development, and interface efforts.

The mRO-50 Ruggedized is a breakthrough microwave optical double resonance (MODR) low SWaP-C Miniaturized Rubidium Oscillator designed to meet the latest commercial, military and aerospace requirements where time stability and power consumption are critical. It provides a one day holdover below 1µs and a retrace below 1E-10 in a form factor (50.8 x 50.8 x 20mm) that takes up only 51 cc of volume (about one-third of the volume compared to standard rubidiums) and consumes only 0.36W of power, which is about ten times less than existing solutions with similar capabilities. The mRO-50 Ruggedized Oscillator provides accurate frequency and precise time synchronization to mobile applications, such as military radio-pack systems in GNSS-degraded or denied environments. Its wide-ranging operating temperature of -40° to +80°C is also ideal for: Underwater Applications, Military Communications, Radars, Low Earth Orbit, Electronic Warfare, Airbornes & Avionics, UAV/UGV/USV/UUV

ABC Software : ORCHID To meet the management requirements of the Control / Command / Acquisition part of our test benches, ABC has designed and developed its own standard and reliable software package: ORCHID. Easy to access and requiring no IT expertise, it is the result of many years of experience in the field of ...

The SC-HPCRTM is a Rear Transition Module (RTM) designed to extend the I/O functionality of the HPC2812 high-performance computing board. It can be mounted on the rear side of the VPX backplane to enhance system connectivity and I/O flexibility. Since the HPC2812 board consists of two computing nodes, the SC-HPCRTM provides dedicated interfaces for each node, including Ethernet, USB, MMCX, and Mini-HDMI ports, ensuring optimal data communication and display output performance in mission-critical embedded systems.

Device for checking turret operation, turret fan control, air conditioning control, and status.

The semi-automatic ViscoTec mix-on-demand station is already in successful use as a mobile system. For reliable mixing and dosing of two-component materials, in situ. Two-component materials are commonly processed using premix cartridges, hardener rod cartridges or by mixing two components by hand. The disadvantages are obvious: The risk of human error, enormous material waste and high production costs offer every reason for taking the automated route. With ViscoTec filling stations, epoxy resins, polysulfides and polyurethanes can be removed from larger containers and filled on-demand with the exact quantity required. The dosing is volumetric on a component or a filling container. A typical application is dosing in so-called inserts (thread inserts). The compact arrangement of the components on a mobile frame guarantees the operator maximum flexibility. The design as a stationary system has already been implemented several times.

Current list of Lockheed Martin products.