STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

This solution follows a three-step process of input, processing, and output, utilizing imagery, DEM, AT, and spatial data to refine 3D models. The editing-based texturing function allows users to correct shape errors, occlusions, and distortions, while the automated texturing ensures consistency and accuracy through advanced geometric matching. Final outputs are stored in standard formats for broad practical applications.

An optimized Plasma FIB-SEM platform with proprietary gas chemistries for high-quality delayering of the most current semiconductor devices

The single-board computer developed by Coats Technology is a core component that implements the performance of weapon systems and satisfies high reliability under environmental conditions such as temperature, vibration, shock, and EMI. It also performs data processing, integration and control of various onboard equipment through data buses, and communication functions to automate command and control, communication, computing, and information elements.

Our radars’ low-Size, Weight, and Power (SWaP) means ample room for other onboard sensors, such as Electro-Optical and Infrared (EO/IR) cameras. Users no longer need to decide which sensor to include and which to exclude. Instead, they can understand the bigger picture. Highly reliable, the NSP-3 has a recommended maintenance interval of 1,250 hours. It can gather data over land and maritime environments and can be used for applications as broad as sea ice monitoring and search and rescue, as well as specialized intelligence, surveillance, and reconnaissance (ISR) missions.

Delivering dinner to your door. Bringing medical supplies to hospitals. Surveying waters where someone is missing. Drones are starting to help make many tasks faster and life a little easier. One hitch in using drones is that, in most cases, regulators in many countries require that a human keep them in sight at all times.

DIVE (Digital Interactive Virtual Environment) is a GIS-based smart construction management platform jointly developed by ZYX Technology and Korea Expressway Corporation. Designed to meet the growing demand for intelligent infrastructure solutions, DIVE provides real-time integration, monitoring, and analysis of all location-based construction data. By consolidating diverse sources such as design drawings, land maps, aerial imagery, BIM data, drone footage, and CCTV into a single platform, DIVE enables comprehensive, on-site visibility and control. From large-scale infrastructure to complex tunnel projects, all key information can be accessed and compared in real time, allowing for smarter, faster, and more accurate decision-making. The main dashboard provides a live overview of each project site, including tasks, equipment, workers, events, and safety issues. With its daily work management feature, site managers can view exact personnel and equipment allocations for each zone, improving efficiency and minimizing risk. DIVE also supports seamless integration with tunnel monitoring systems, offering real-time access to excavation status, geotechnical sensors, and worker presence inside the tunnel. This ensures enhanced safety and process transparency in high-risk environments. Drone integration further strengthens site management by providing up-to-date aerial visuals, reducing blind spots and enabling rapid response to field changes. In addition, the platform links design drawings with cadastral maps to streamline permitting, track construction progress, and manage change orders with geographic accuracy. Whether you're building roads, tunnels, or complex infrastructure, DIVE empowers construction teams with a powerful digital environment to manage the entire project lifecycle.

The focus on buy-to-fly ratios highlights the contributing role that near net shape processing can offer. This has undoubtedly been a driver in increasing this service offering from AMA. As a major contributor in the aircraft manufacturing supply chain, this is a key area of development for AMA and its companies. Customers are increasingly looking to optimise their production processes. This is primarily driven by the need to maximise their own spindle time for core business activities, with AMA therefore undertaking some of the machining processes. It can take many forms, from simple cutting to more intricate processing in which near net shape pieces are supplied. Even in AMA businesses whose business is predominantly transactional (so called ‘spot business’) rather than contractual, the processing element is increasing. Pre-machined kits of parts to individual specifications are becoming more commonplace. In addition to freeing up time for customers and OEMs to focus on more profitable final processing, near net shape processes can improve product quality, reduce variability and enhance component design functionality. As the industry continues to search for ways to lower buy-to-fly ratios and reduce the amount of waste, near net shape processing will have a greater role to play.