It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

The DRU-H-R has growth capacity to add an embedded Selective Availability Anti-Spoofing Module (SAASM) GPS with M-code capability. It can also be configured to function in unmanned, rotational and shipboard environments. The DRU-H-R is an advanced precision navigation system that provides accurate vehicle position and attitude data. This unit replaced the DRU-H on Paladin and Firefinder, both playing critical roles in supporting U.S. ground forces in all phases of active combat operations. The EMCORE DRU-H-R design upgraded system performance by using high accuracy, combat-proven inertial sensors currently fielded on the Multiple Launch Rocket System (MLRS), High-Mobility Artillery Rocket System (HIMARS), and Improved Position and Azimuth Determining System (IPADS). The DRU-H-R delivers precisely what the Army of tomorrow needs — a sustainable, affordable system designed to remain operationally effective well into the future.

Power Supply 0...80V 0...510A 15000W

Technology research that needs to be developed/secured to efficiently train future combat pilots ETS must have the ability to provide a realistic training environment in which pilots can immerse themselves in training through the use of simulations and CGFs within a real platform. The advantage of ETS is that it provides trainees with a training experience that is close to the real thing and reduces overall system operating costs by replacing real systems and consumables with simulations. Developed countries are already continuing to attempt to apply various core technologies to increase the efficiency of ETS. Hangil C&C Co., Ltd. is the only ETS development company in Korea, and is striving to develop cutting-edge ETS by combining years of research and development experience and its core technologies.

A ground control system that establishes unmanned aerial vehicle missions, controls aircraft and mission equipment, reads image information, and transmits it to higher-level units.

Microchip Technology Incorporated is a leading provider of smart, connected and secure embedded control solutions. Its easy-to-use development tools and comprehensive product portfolio enable customers to create optimal designs, which reduce risk while lowering total system cost and time to market. The company's solutions serve more than 120,000 customers across the industrial, automotive, consumer, aerospace and defense, communications and computing markets. Headquartered in Chandler, Arizona, Microchip offers outstanding technical support along with dependable delivery and quality. Welcome to Microchip, we hope to partner with you on a future project. We believe together we can accomplish anything.

Fast & precise 5-axis exceeds expectations • 15000, 20000 r/min high speed spindle • B-axis/C-axis 0.0001 degree control as standard • Tool change time (C-T-C) 3.8s, 28% faster than previous model • Increased X/Y/Z-axis rapid traverse speed & acc./dec. • Cooling functions as std. on spindle, motor/LM guide/ball screw (X/Y/Z), C-axis table motor • Integrated thermal compensation systems for spindle and structure FURTHER INCREASED MACHINING CAPACITY • Ø630mm dia. 2-axis tilting table, 26% increased compared to previous model • Max. Ø600 x H500mm machining area, 32% increased compared to previous model • Max. 400kg table load capacity with stable table support structure • X/Y/Z axis travel distance 650/520/480mm, up to 20% increased compared to previous model EASY ACCESS, EASIER OPERATION • Easy setup of workpieces with 580mm distance between operator and table center • Easy tool exchange by placing the tool magazine door on the front and applying a tool removal device (Auto Kicking Device) • Improved chip disposal capability with enhanced coolant flood & flushing functions • Grease lubrication system • Compact integrated automation system (AWC)

AI-based Intelligence, Surveillance and Reconnaissance Equipment