Battlefield's Quick Disconnect technology is a leader in the UAV industry, and is now expanding expanding into ground defense vehicles. With over one million hours of successful flight time, Battlefield's quick disconnects have proven exceptional reliability even in extreme environments. EnduroLink by Battlefield has become the global standard UAV quick disconnects, widely applied across small to mid-sized UAV platforms worldwide. Fully customizable integrated design is available, including materials, size, and various end connect options even in the most demanding conditions.

Founded in 1849, Ducommun is the oldest company in California, USA. Currently located in Carson, near Los Angeles, the company began as a hardware supply store in Los Angeles during the California Gold Rush and now designs and manufactures aerospace, RF coaxial switches, switch matrices, and millimeter-wave components. - Microwave Products (available from DC to 46GHz SPST through the SP10T range) - Switch Matrices (product design and customization to meet individual customer requirements) - Ducommun RF products cover the DC range up to 110GHz - Coaxial Switches available up to 40GHz - Low Noise / High Power RF Products - Space-Grade Products

The mRO-50 Ruggedized is a breakthrough microwave optical double resonance (MODR) low SWaP-C Miniaturized Rubidium Oscillator designed to meet the latest commercial, military and aerospace requirements where time stability and power consumption are critical. It provides a one day holdover below 1µs and a retrace below 1E-10 in a form factor (50.8 x 50.8 x 20mm) that takes up only 51 cc of volume (about one-third of the volume compared to standard rubidiums) and consumes only 0.36W of power, which is about ten times less than existing solutions with similar capabilities. The mRO-50 Ruggedized Oscillator provides accurate frequency and precise time synchronization to mobile applications, such as military radio-pack systems in GNSS-degraded or denied environments. Its wide-ranging operating temperature of -40° to +80°C is also ideal for: Underwater Applications, Military Communications, Radars, Low Earth Orbit, Electronic Warfare, Airbornes & Avionics, UAV/UGV/USV/UUV

With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

The ARTUS Lite’s prowess extends to tele-operation scenarios, particularly within military, nuclear, and bio-pharma applications, where an end-effector that operates with both finesse and confidence is crucial. It provides a safe and precise solution for remote manipulation in hazardous or inaccessible environments, proving vital in environments where the safety and replacement of manual labor are urgent concerns. It excels in machine tending and pick-and-place automation within greenhouses, warehouses, and recycling facilities, enhancing productivity while prioritizing worker safety.

- FOG based Inertial Navigation System for Gyrocompass - Position Accuracy(INS/GPS): < 3 m - Heading Accuracy: < 0.1º  sec (LAT) - Attitude Accuracy(Static): 0.01º - Attitude Accuracy(Dynamic): 0.01º - Operating Voltage: 9 to 36 VDC - Power Consumption: < 15 W (typ.) - Dimension(L x W x H): 330 mm x 192mm x 180mm

The SC-SSGMRTM, a Seedcore Co., Ltd representative product, is a backplane transmission module that performs the I/O function of the SSGM(Synchronous Signal Generation Module). When the SSGM(Synchronous Signal Generation Module) board is plugged into the motherboard(Backplane) in front of the Chassis, you can extend the I/O function of the board by plugging the SC-SSGMRTM board into the back of the Backplane. Three 37-pin Micro D-sub ports are used to send synchronization signals generated by SC-SSGM to the outside or to receive external synchronization signals, Three separate MMCX output ports are prepared to support test equipment such as oscilloscopes, and you can convert them to various signals and output them.

The AI Inspection Rover is capable of autonomous driving indoors and outdoors, obstacle avoidance, high-resolution image acquisition, aircraft underbody inspection, and platooning. Its low-height design allows it to pass under the aircraft, and with its zero-turn function, it can execute missions more efficiently. Additionally, it can drive slopes of up to 10° and overcome bumps of up to 30mm.