SkyNaute™ hybrid inertial/GNSS navigation system meets all the safety and reliability requirements for airplanes, helicopters and drones. Thanks to the HRG Crystal™, SkyNaute™ is the most competitive aeronautical navigation system on the market. The best in safe performance SkyNaute™ Inertial Navigation System relies on mature and proven technologies such as HRG Crystal™ Hemispherical Resonator Gyroscopes. Combining high performance and integrity in all circumstances, SkyNaute™ shows exceptional physical features compared to competing INS with similar performance.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

The KX1-3046 is an X-band high-power MMIC amplifier fabricated on the GaN-on-SiC process. It operates from 8.0 – 10.5 GHz and typically provides 30W saturated output power with power-added efficiency of 46%. The KX1-3046 can support military and commercial radar systems. It is matched to 50Ω with integrated DC blocking capacitors on both RF input and output ports. The KX1-3046 is 100% DC and RF tested on-wafer. It is available in chip form. **Key Features** - Frequency Range: 8.0-10.5GHz - Small Signal Gain: 28dB - High Pout: 30W - High PAE: 46% - DC bias: Vd=28V @Idq=0.6A - Pulsed Vg: PW=100µs, DC=10% - Chip size: 2.95x3.1x0.1mm  

Every Partnership Pavilion is staffed by an experienced event team. Whether it’s coordinating with the show organizer; providing technical support; assisting with contractors, catering, or translators; or tracking a shipment, Team Kallman will help.

The Eagle Passive Active Warning Survivability System provides the U.S. Air Force F-15 fleet with advanced electronic warfare technology to maximize mission ...

L3Harris search page.

The SCXMC-SFPDP is a high-speed optical communication card that operates through the XMC interface of the SBC. It is designed to transmit and receive large volumes of data between the SBC and other devices in real time. Unlike Ethernet, which can be difficult to synchronize, the SCXMC-SFPDP uses optical communication with synchronization signals, enabling precise and high-speed data transfer. It offers low response latency (<40 µs) and supports four transmit/receive channels at 3.125 Gbps per channel. A device driver program is required for operation, and the Linux driver can be downloaded from Seedcore’s product page. Drivers for other operating systems can be developed upon request. This module is deployed in the L-SAM multi-function radar system to ensure reliable real-time data transmission between mission-critical subsystems.

Temperature / Flame Resistant Seals Reinforced & Non-Reinforced Seals Vulcanized Bonding Custom Technical Elastomeric Solutions