NarSha is a dedicated small satellite for monitoring methane (CH₄) emissions, a key contributor to the climate crisis. It is the first satellite of its kind in South Korea to be developed and led by a private company. The launch of NarSha-1 is targeted for the fourth quarter of 2026.

The SC-SBCRTM-V2 is a Rear Transition Module (RTM) designed to extend the I/O functionality of the SBC6511 single-board computer. Mounted on the rear side of the main VPX backplane, this module provides additional I/O expansion through Micro-D and D-sub connectors for synchronization signals, two Ethernet ports, two Mini-DisplayPort video outputs, two USB interfaces, and MMCX connectors. It enhances system flexibility and connectivity for embedded and radar signal-processing applications.

Ultra-High Accuracy MEMS Motus features some of the highest accuracy MEMS accelerometers and gyroscopes currently available. Motus’s inertial performance exceeds some FOG IMUs and is up to 100x smaller and 10x cheaper. Motus is put through Advanced Navigation’s intensive calibration process to provide consistently accurate data over an extended temperature range of -40°C to 85°C. Miniature Package Never before has such high inertial performance been available in such a small package. Motus consumes just over 1 cubic inch in volume and weighs only 26 grams. This makes it ideal for weight and size sensitive applications. Motus is available in an OEM package suitable for integration into larger products or an enclosed package for external and standalone use. Advanced Signal Processing Motus samples its sensors synchronously at 1000Hz through six individual 24-bit differential ADCs which minimizes noise as well as providing optimal thermal calibration and performance characteristics. 14 separate heavily filtered regulated power supplies ensure that each sensor and ADC is operating off the cleanest possible power supply. Reliability Motus has been designed from the ground up for mission critical control applications where reliability is very important. It is built on top of a safety oriented real time operating system and all software is designed and tested to safety standards with fault tolerance in mind. The hardware is designed and manufactured to mil standards. High Update Rate Motus outputs temperature calibrated sensor data at 1000Hz as well as filtered attitude at the same rate. This allows for control of dynamically unstable platforms.

EpiShuttle is all about protecting both patients and health care professionals. The EpiShuttle is an isolation unit designed for quick and easy transport of highly infectious and vulnerable patients.

ALA is an innovative provider of Supply Chain Solutions for C-Class components, indirect materials, and a variety of market-specific products finding their application on a wide range of platforms in the Aerospace OEM & MRO, Defense, Power Generation, Rail & High-Tech Industries.

SeaHFlight is an advanced 2D/3D GIS-based command and control solution engineered for the comprehensive management of low-altitude aircraft, including helicopters, drones, and future UAMs. It provides a complete operational picture, offering full lifecycle management from initial flight planning and real-time monitoring to post-flight performance analysis. Key Capabilities: Unified Situational Awareness: Achieve superior decision-making with a dynamic 2D/3D operational map that visualizes all air assets in real-time. The system integrates crucial data layers, including weather, airspace information, and flight plans. End-to-End Mission Management: Streamline the entire operational workflow, covering everything from flight plan creation and pilot hour management to flight history recording and detailed performance evaluation. Proven Interoperability: SeaHFlight is designed for seamless data integration with key national and military agencies (Army, Police, National Fire Agency, Forest Service). This creates a unified network for complex, multi-agency public safety or defense operations. Future-Ready Platform: Built to manage not only current helicopter and drone fleets but also the next generation of Urban Air Mobility (UAM), SeaHFlight is a scalable, long-term solution for modern aviation.

For electrical and electronic signal connections inside and outside the hermetic equipment, it reliably protects the device from extreme temperature/humidity changes, vibration and physical/chemical effects, and transmits signals and currents without loss. These connectors use special glass or ceramic as insulation and are used in furnaces, power breakers, submarines, gas control systems, transformer safety devices, etc. Key features of closed connectors: It completely blocks the interior from the outside environment to keep it vacuumed or pressurized. Durability: It works reliably in extreme environments (high temperature, low temperature, humidity, chemicals, etc.). Electrical performance: It delivers electrical signals or power without loss.

NICKEL 200 / 201 -Bars-Sheets and Plates-Tubes and Pipes NICKEL 270 -Sheets and Plates-Wire MONEL® ALLOY 400 -Bars-Sheets and Plates-Tubes and Pipes MONEL® ALLOY K-500 -Bars NILO® Alloy 36 -Bars-Sheets and Plates-Tubes and Pipes NILO® Alloy 42 -Bars-Sheets and Plates NILO® Alloy 48 -Bars-Strip NILO® Alloy K -Bars-Sheets and Plates-Wire INCONEL® Alloy 230 -Bars-Sheets and Plates INCONEL® Alloy 600 -Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 601 -Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 617 -Bars-Sheets and Plates INCONEL® Alloy 625 -Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 625LCF® -Sheets and Plates INCONEL® Alloy 693 -Sheets and Plates-Tubes and Pipes INCONEL® Alloy 718 -Bars-Sheets and Plates INCONEL® Alloy X-750 -Bars-Sheets and Plates INCONEL® Alloy C-276 -Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy HX -Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 22 -Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy 800 H / HT -Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy 825 -Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy DS -Bars-Sheets and Plates INCOLOY® Alloy 330 -Sheets and Plates INCOLOY® Alloy A-286 -Bars-Sheets and Plates NIMONIC® Alloy 75 -Bars-Sheets and Plates NIMONIC® Alloy 80A -Bars-Sheets and Plates NIMONIC® Alloy 90 -Bars-Sheets and Plates-Wire-Strip NIMONIC® Alloy 263 -Sheets and Plates UDIMET® Alloy 188 -Bars-Sheets and Plates UDIMET® Alloy L-605 -Bars-Sheets and Plates Waspaloy® -Sheets and Plates