Relief Valve ensures high flow rate compared to competitor market designs. Climb/Dive Valve is a pressure equalizing solution for enclosed volumes that experience pressure differential levels between the internal and external pressure values of the system. Ball Valve is very commonly used on UAV and land systems. It is available with high torque and low torque actuation. Materials, sizes, end connects customizable.

Our broad alloy portfolio enables customers to achieve higher efficiencies, reduce pollution levels, extend product life, and reduce costs. Our corrosion-resistant alloys are generally distinguished by the HASTELLOY® brand and our high-temperature family of alloys are generally distinguished by the brand.

The UHF-band TRX module features transmit diversity, allowing selection between two transmit ports and providing an output power of at least 1 W. It includes a gain control function for transmission and an internal local oscillator for IF-to-UHF upconversion. Transmit functions also include ALC (Automatic Level Control) and over-temperature protection. On the receive side, the module selects one of two input channels and performs downconversion. It supports AGC (Automatic Gain Control) with a response time of 80 µs, enabling real-time gain adjustment based on input signal level. The dynamic range of the receive input spans from -100 dBm to -20 dBm, and the noise figure is 5.0 dB or less. Both transmit and receive paths include built-in path self-test functions.

The Ophir® SupIR 80-1200mm MWIR f/5.5 and SupIR 60-1200mm MWIR f/4 lenses are designed for 15 µm 640x512 and SXGA 10 µm pitch FPA (focal plan arrays) cooled MWIR detectors, respectively, providing detection ranges exceeding 28 km. Key Features: - High performance IR continuous zoom lens - Compatibility with 10 µm SXGA/HD and 15 µm 640x512 cameras - Maintains accurate LOS & focus through the full zoom range - Designed for extended range observation & C-UAS systems - Detection range exceeds 26 km

GE's T901 Engine for ITEPA test cell is not a combat mission. In combat, there is no time for an unproven design. With more than 100 million flight hours of ...

This Control Actuation System (CAS) is a guidance system for unmanned flying objects. It consists of three MPS fin actuators that each independently position an aerodynamic fin. The maximum angle of incidence is ±8°, which allows the device to carry out highly precise dynamic manoeuvres. The miniature fin actuators that make up this Control Actuation System are manufactured by MPS Microsystems and were designed based on customer specifications. Designed to guide a very small object and disposing of an extremely limited space, these fin actuators meet strict requirements in terms of performance, weight - less than 100 g - and dimensions. To reduce the length of this actuator, MPS Microsystems used part of the screw length as the motor axis. This screw is equipped with a very compact 4-point contact bearing that simultaneously absorbs axial and radial loads. The angular play on the aileron axis is less than 0.1° rms. This actuator meets the storage and vibration requirements of military equipment.

Suite au Conseil du 7 octobre 2021, le GIFAS a accueilli Elixir Aircraft. Découvrez le témoignage de son Président. " Elixir Aircraft, entreprise rochelaise de 60 salariés, a été créé en 2015 afin de répondre aux enjeux de l'aviation légère : réaliser des appareils plus sûrs, plus économes et plus polyvalents .