Vector AI provides real-time, high-resolution ISR data with minimal signature and a modular architecture that allows it to adapt to various mission profiles. With thousands of operational hours, including in active combat in the Ukraine, Vector AI is trusted by defence and security forces globally. Key Features: Up to 180 minutes of flight time Silent electric propulsion Fixed-wing performance with VTOL convenience AI-powered onboard computing and object recognition Open systems architecture for flexible payload integration Seamless switch to multicopter configuration using shared hardware

The 100W High Power Amplifier is an L-band amplifier that delivers 100W output across two channels with a 60% duty cycle. It offers a gain of over 50 dB, with output flatness of 2 dB depending on the input signal level. The amplifier provides an ACLR performance of -20 dBc at maximum output. Equipped with an output-stage bandpass filter (BPF), it achieves excellent harmonic suppression of -70 dBc. Built-in monitoring functions include output signal and temperature monitoring.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

24-7 non-stop operating RADAR for ceaseless aerial surveillance and early trajectory detection. Design and Manufacture - Antenna Housing - Driving Unit

FIRSTEC is developing primary components such as avionics & environmental control devices for KF-21, T-50, KUH, and LAH/LCH.

The KX1-3046 is an X-band high-power MMIC amplifier fabricated on the GaN-on-SiC process. It operates from 8.0 – 10.5 GHz and typically provides 30W saturated output power with power-added efficiency of 46%. The KX1-3046 can support military and commercial radar systems. It is matched to 50Ω with integrated DC blocking capacitors on both RF input and output ports. The KX1-3046 is 100% DC and RF tested on-wafer. It is available in chip form. **Key Features** - Frequency Range: 8.0-10.5GHz - Small Signal Gain: 28dB - High Pout: 30W - High PAE: 46% - DC bias: Vd=28V @Idq=0.6A - Pulsed Vg: PW=100µs, DC=10% - Chip size: 2.95x3.1x0.1mm  

Model-Based Systems Engineering (MBSE) is a methodology that integrates design, analysis, and verification activities throughout the system lifecycle using architecture models. By modeling requirements, functions, structure, and behavior, MBSE supports consistent and informed decision-making. Ansys SAM (System Architecture Modeler) supports the latest system modeling language, SysML v2, and enables both graphical and textual modeling, real-time collaboration, and model management. Ansys ModelCenter integrates various engineering tools and builds automated workflows, enabling what-if simulations and trade studies. By connecting architecture models with simulation models, it supports consistent design analysis and requirements validation using a single source of truth (ASoT).