The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

Temperature / Flame Resistant Seals Reinforced & Non-Reinforced Seals Vulcanized Bonding Custom Technical Elastomeric Solutions

A comprehensive line of products in C, X, Ku, Ka and Q-band for SATCOM and 5G&6G are available as off-the-shelf items or custom-made design upon request. These products are specialized in various types of mobility environment including airborne application. We serve the customers in more than 20 countries with fully field proven products. The new era of wireless communication requires a converged solution of SATCOM and 5G&6G in the aspects of technologies and services. XMW is preparing for the new era with the solutions inherited from SATCOM and 5G&6G business for more than a decade.

Temperature Calibrated Pressure Sensors The Air Data Unit features very high accuracy absolute and differential pressure sensors. These are factory calibrated over a wide temperature range to further increase measurement accuracy and provide the best air data possible through varying conditions. Power Up Self-Calibration On top of factory temperature calibration, every time the air data unit powers up, it performs a self excitation calibration to adjust for small deviations of bias and scaling error. This allows the system to compensate for calibration aging and means that it never needs to be returned to the factory for recalibration. Reliability The Air Data Unit is built on top of a safety oriented real time operating system and all software is designed and tested to safety standards with fault tolerance. Its communication interface is optically isolated and the hardware is designed and tested to MIL spec.

Electric motor used to drive the joint (ST axis) of the Explosive Ordnance Disposal (EOD) Robot.

The reference timing is used as the standard time for many tasks linked in various fields of industry and society. Especially precisely synchronized timing information and signals are widely used to keep mobile networks synchronization and generate precise time and frequency. In addition, it is being utilized in various ways such as power protection system for power generation and load management of each power plant according to smart grid issue, military satellite communication, electronic warfare signal detection and command control communication system. Features NTP Related Content Timing Accuracy (1PPS): ± 100ns or less Providing Various Frequency Outputs According to User's Requirements GPS L1 Signal Synchronization Event Logging and Network Remote Management Available for operators ODM / OEM Supply Available Proven Stability Through Various Performances of Mobile Communication Network and Power Protection System Providing IRIG-B (TTL, SINE) Signal Input / Output Interface (selectable according to User's Requirement) Providing GPS NMEA in Message API form (N220) Providing PCIe Interface

The ACTUS® ARKS4325 (4-32X, 56mm FFP) Long Range Riflescope is built for precision and durability, designed to meet the needs of professional users in diverse environments. Featuring a First Focal Plane (FFP) optical design, it ensures fast and accurate target coverage across all magnification levels. The illuminated reticle provides clear and smooth targeting, even in low-light conditions like dawn or dusk. Whether in demanding or dynamic environments, the ACTUS® ARKS4325 delivers outstanding performance, making it the ideal riflescope for users who require unmatched reliability and accuracy in critical moments.