Custom Technical Elastomeric Solutions

We are Hyundai Steel, a member of Hyundai Motor Group, developing advanced composite parts for aircraft and AAM, with a focus on both structural and exterior applications. Using our rapid press-forming process, we can manufacture high-quality components in under 30 minutes, enabling faster production cycles and reliable performance. We also bring prior experience in small-scale production of automotive composite parts, strengthening our expertise across industries. If you are seeking to enhance the productivity of your composite parts, please feel free to contact us anytime for collaboration.

A converter-integrated Main Generator installed in the T-50 series that supplies power to the system.

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

The DRU-H-R has growth capacity to add an embedded Selective Availability Anti-Spoofing Module (SAASM) GPS with M-code capability. It can also be configured to function in unmanned, rotational and shipboard environments. The DRU-H-R is an advanced precision navigation system that provides accurate vehicle position and attitude data. This unit replaced the DRU-H on Paladin and Firefinder, both playing critical roles in supporting U.S. ground forces in all phases of active combat operations. The EMCORE DRU-H-R design upgraded system performance by using high accuracy, combat-proven inertial sensors currently fielded on the Multiple Launch Rocket System (MLRS), High-Mobility Artillery Rocket System (HIMARS), and Improved Position and Azimuth Determining System (IPADS). The DRU-H-R delivers precisely what the Army of tomorrow needs — a sustainable, affordable system designed to remain operationally effective well into the future.

- 1 axis Fiber Optic Gyroscope - Bias Repeatability (over temp. range): ≤ 1.0º /hr (1σ, RMS) - Angle Random Walk: 0.035º /√hr (typical, 1σ) - Power Consumption: 1.3 W @ 25℃ (<2.4 W, @ -40℃) - Input Voltage: + 5 V - Weight: 165 g (0.36 lbs)

Whether satellites, spacecraft or space debris – GESTRA, the "German Experimental Surveillance and Tracking Radar", is a state-of-the-art radar system for observing and tracking objects in space. It operates in the microwave range and explores the Low Earth Orbit of 300 to 3,000 kilometres, i.e. the range in which most satellites and the International Space Station (ISS) are located. This makes it possible, for example, to protect space systems or the ISS from a collision with debris particles by providing a timely warning. Millions of tiny particles orbit the earth and, at a speed of around 28,000 km/h, pose a threat to active space technologies. GESTRA was developed and built by the Fraunhofer Institute for High Frequency Physics and Radar Techniques FHR on behalf of the German Space Agency at DLR.