Supports non-destructive inspection of aircraft composite skin structures and is composed of a piezoelectric layer sensor, data acquisition equipment, and damage analysis software. Utilizes piezoelectric sensors to generate Lamb-wave and acquire signals, collecting data to accurately detect and assess composite damage. Visualizes inspection results on display such as damage location, size and index. - POD Accuracy: 1 inch 90% or more - POD Precision : Position error within 30 mm - 64 channels / 230 path reference detection time within 10 minutes - Sensor : Resonance resistance less than 400kΩ - Sensor : MIL-STD-810G - Sensor : RTCA DO-160 Section 23.0 - DAQ : x128 Piezoelectric sensor interface

Premium refined titanium ingots, manufactured using imported high-purity titanium sponge and subjected to a minimum of two VAR (Vacuum Arc Remelting) processes. Forged to meet customer requirements, available in various semi-finished forms (bar, plate, ring) for defense and display industries.

Digitally recorded distressed and alarmed birds, along with the sounds made by their natural predators are broadcast through high output weather-resistant speakers. This triggers a primal fear and flee response. Super easy installation figure makes the systern portable across crop and place Replaceable, customizable species specific bio- acoustic sound chip according to birds kinds and specific regions Effective Coverage: Up to 50m for one single direction, approximately 5,000 square meter Technology integrated operation system enables sound duration and interval to prevent habituation to the sounds Overcharge, over-discharge protection Sound Pressure: 120-130 db at 1 meter Frequency: 3-5 kHz With severe bird infestations, it is always recommended to use at least 2 bird control methods together. Sonic cannon is a very good to use in conjunction with the bio-acoustic bird repeller.

The NSP-2 is designed for integration on Modular-Payload (MP) compliant Unmanned Airborne Systems (UAS), and each unit undergoes thorough testing to ensure its reliability. Instead of a mechanical gimbal that requires regular maintenance, IMSAR’s NSP-2 uses an innovative 2D Electronically-Scanned Array (ESA) antenna to enable quick scanning in both azimuth and elevation. The NSP-2 works in the Ku-band using multiple modes, such as Synthetic Aperture Radar (SAR) imaging, Magnitude Change Detection (MCD), and Ground and Maritime Moving Target Indication (MTI) at low altitudes.

Illumia XAVA is an authoring and planning tool that enables trainers to create customized training content, including interactive learning materials, lecture materials with knowledge checks and AI-driven Q&A support.

1. Technical collaboration leveraging KAI's expertise in Surion(KUH) and LAH helicopters 2. Expanding AMO maintenance types and repair/modification capabilities [Rotary Wing Business] - Periodic Maintenance for KUH-1 and MUH-1 - Modification & Installation/Periodic Maintenance for EC-225 - Periodic Maintenance for AW-139 - Performed assembly work for Bell's B-505 helicopters

Cooled thermal imaging camera module F/#4.0 • Detector type: Cooled InSb 15μm (640 x 512) • NETD: <20mk typical (without lens) • Continuous ZOOM LENS • Continuous Digital Zoom • Advanced image processing - Auto Gain Control (AGC) ) - Adaptive Histogram Equalization (Adaptive HEQ) - Local Area Enhancement (LAE) - Digital Detail Enhancement (DDE) - Denoise Reduction (DNR) - Sharpness • MTTF (Mean Time To Failure) 15,000 hours • Various color sets (WhiteHot / Rainbow / Twilight / TwilightShifted / Turbo / Iron / Plasma)

Haigh-Farr designs support hardware to work hand-in-hand with our solutions to maximize performance. Our support hardware utilizes the same well-proven construction as the antennas they support. Power Dividers, Combiners, Hybrids & Diplexers