Processor - 64-bit Quad Core PowerPC QorIQT2080 up to 1.2GHz - 6 DMIPS/MHz per core (up to 28,800 DMIPS@1.2GHz) - 128b AltiVecSIMD unit (up to 38.4 GFLOPs@1.2GHz) Memory - 4GB soldered 64-bit DDR3L SDRAM with ECC - 256MB 16-bit NOR flash - 64GB SATA NAND SSD - 512KB NvRAM Form Factor - 6U VME - Conduction-Cooled, Air-cooled support

This system product is a product that directly supplies and heats lubricant oil for smooth operation of the main engine cylinder’s metallic and mechanical movement. Lubricator, a product that supplies lubrication directly to the main engine cylinder liner, can control injection timing and consumption using an electronic control method that responds to the movement of the main engine piston. The alpha lubricator system is based on an algorithm controlling the cylinder oil dosage proportionally to the sulphur content in the fuel and, fuel consumption on particular load of engine. Minimum cylinder oil dosage is required to provide an adequate oil film and detergency properties. Everllence and WIN GD engines are currently applying the second generation Lubricator type, the Everllence type is Mk-I and the WIN GD type is Mk-ε (Epsilon).

Main Features of CLS-30T5 Camera Link Compatibility: Supports all Camera Link types (Area Scan / Line Scan). Video Distribution: 1:5 distribution capability supporting Base, Medium, and Full configurations. Power over Camera Link (PoCL): Performs PoCL Bypass functionality. Pixel Frequency: Supports a pixel frequency range of 20 MHz to 85 MHz. Transmission Quality: Ensures lossless video signal transmission. Power Connector: Equipped with a lockable DC power jack (Molex connector). Interface: Supports MDR-26 type connectors. Control Signal Support: Supports all standard RS-232 communication speeds.

Linden Photonics cables ensure stability and reliability even in extreme environments. With patented LCP jacket, non-kink design, maximum continuous length of 50 km, and crush-resistant durability, Linden Photonics provides high-performance cables optimized for deep-sea and aerospace applications.

Metal braided sleeving and tubular expandable braided cable shielding is used primarily in the electrical wire interconnect industry to protect cables from electrostatic and electromagnetic interference. The interwoven conductive wire acts as a ground-path barrier that attenuates cable electrical field interference. In addition, both metallic and non-metallic braided shielding provides abrasion and cut protection for critical wiring, a particular concern in environments, such as aircraft, where vibration or other forms of rough handling may result in damage to individual wire conductors and cable bundles. Glenair manufactures the world's most innovative line of metal, monofilament non-metallic, and microfilament composite and stainless steel braiding solutions for environmental, mechanical, and EMC shielding in interconnect cable assemblies. Our industry-leading ArmorLite braided shielding is manufactured from ultra-lightweight stainless steel microfilaments, metal-clad for optimal conductivity and EMI/RFI shielding. Our AmberStrand tubular braided shielding is built from a lightweight composite thermoplastic microfilament, with or without additional metal filaments and plated for outstanding grounding and shielding protection. From high-temperature fiberglass tubular shielding for engine applications to ultra-lightweight EMI/RFI braided shielding for electrical wire interconnect grounding applications, Glenair offers the industry's most innovative range of solutions.

We, STX Engine, started with our business to be designated as a defense company in 1977 and established a factory for defense purposes in 1988. Moreover, we have grown into a largest defense diesel engine manufacturer by licensing with MTU. Based on the aforementioned fact, we manufacture and provide diesel engines for main battle tank, self-propelled artillery and armored vehicle to ROK Army, for destroyer, frigate, patrol vessel and support vessel to ROK Navy, for patrol vessel to Korea Coast Guard as well.

Side shells, wing shells and fuselage structures are made of CFK, GFK, aluminium or organic sheets and get connected during production. Sealants are used to seal the connection surfaces. These are usually two-component polysulphides, which have to be applied in different geometries. Typical applications are: Fillet sealings, oversealings, interface sealings and seal caps. Due to their properties, polysulfides require very low pressure and shear handling. The compressibility of the fillers contained in the medium requires a high level of expertise and a coherent overall system from material removal to application. With manual application, long production times and high material ejection have a negative influence on the complete process. Complex quality standards are required due to the risk of human error. With the in-house developments of the vipro-DUOMIX from ViscoTec, this process can be depicted fully automatically. The individual nozzle design is also adapted to each application. The result is a controlled dosage in compliance with the specifications and at the same time the highest repeat accuracy.