Additive manufacturing: - delivers compact, high-efficiency transmission coolers with optimized fluid paths, reducing pressure loss and enhancing thermal performance in compact spaces. - provides custom designed oil coolers with improved heat dissipation, ensuring reliable performance, reduced weight, and enhanced durability in demanding environments. - enables integrated multi-domain liquid cooling solutions, providing precise thermal management and compact designs across complex systems with diverse cooling needs.

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

Patrol Killer Guided Electro Optic Target System

The IMX-5 delivers Tactical Grade Inertial performance powered by TWO of the most powerful GNSS receivers on the market. Inside the aluminum enclosure, this sensor is prepared to take you through difficult terrain. The IMX-5 provides sensor fusion for roll, pitch, magnetic heading, velocity, RTK precision position and Dual GNSS Compass Heading. Features Tactical Grade IMU Dual Onboard Multi-Frequency (L1/L2) GNSS Receivers Dual GNSS Compassing RTK Centimeter Level Precision Rugged IP40 Aluminum Enclosure Gyro: 1.5 °/hr Bias Instability, 0.16 °/√hr ARW Accel: 19 µg Bias Instability, 0.02 m/s/√hr VRW 0.04° Dynamic Roll/Pitch 0.13° Dynamic Heading Fast Integration with SDK and Example Software Data Logging (SDK and Application Software)

The UHF-band TRX module features transmit diversity, allowing selection between two transmit ports and providing an output power of at least 1 W. It includes a gain control function for transmission and an internal local oscillator for IF-to-UHF upconversion. Transmit functions also include ALC (Automatic Level Control) and over-temperature protection. On the receive side, the module selects one of two input channels and performs downconversion. It supports AGC (Automatic Gain Control) with a response time of 80 µs, enabling real-time gain adjustment based on input signal level. The dynamic range of the receive input spans from -100 dBm to -20 dBm, and the noise figure is 5.0 dB or less. Both transmit and receive paths include built-in path self-test functions.

The GRA117S is a rugged 3U VPX SOSA-aligned video graphics and GPGPU card delivering high-performance AI and graphics with the NVIDIA RTX™ 5000 and PCIe Gen-4 connectivity. • NVIDIA RTX™ 5000 (Ada Lovelace) GPU: 16 GB GDDR6 ECC, 9,728 CUDA/76 RT/304 Tensor Cores • PCIe Gen-4 interface, AV1/H.264/H.265 codecs, GPUDirect RDMA • Rugged design: conformal coating, air- & conduction-cooled, −40–71 °C range • SOSA slot profiles 14.6.11 & 14.6.13 compliant • Windows/Linux drivers, CUDA/CUDA-X/OpenCL support

The KX2-2046 is an X-band high-power MMIC amplifier fabricated on the GaN-on-SiC process. It operates from 8.0 – 10.5 GHz and typically provides 20W saturated output power with power-added efficiency of 46%. The KX2-2046 can support military and commercial radar systems. It is matched to 50Ω with integrated DC blocking capacitors on both RF input and output ports. The KX2-2046 is 100% DC and RF tested on-wafer. It is available in chip form. **Key Features** - Frequency Range: 8.0-11.5GHz - Small Signal Gain: 26dB - High Pout: 20W - High PAE: 46% - DC bias: Vd=28V @Idq=0.3A - Pulsed Vg: PW=100µs, DC=10% - Chip size: 2.95x1.66x0.1mm