This Control Actuation System (CAS) is a guidance system for unmanned flying objects. It consists of three MPS fin actuators that each independently position an aerodynamic fin. The maximum angle of incidence is ±8°, which allows the device to carry out highly precise dynamic manoeuvres. The miniature fin actuators that make up this Control Actuation System are manufactured by MPS Microsystems and were designed based on customer specifications. Designed to guide a very small object and disposing of an extremely limited space, these fin actuators meet strict requirements in terms of performance, weight - less than 100 g - and dimensions. To reduce the length of this actuator, MPS Microsystems used part of the screw length as the motor axis. This screw is equipped with a very compact 4-point contact bearing that simultaneously absorbs axial and radial loads. The angular play on the aileron axis is less than 0.1° rms. This actuator meets the storage and vibration requirements of military equipment.

ㅇKey Features RF Front-End - Frequency : C-Band - Tx Power : +27 dBm(0.5 W) , Rx Range : -10 ∼ -100 dBm - Rx Sensitivity : -95 dBm@2 MHz Baseband & Modem - Downlink : 2.4 Mbps / Uplink: 8 kbps - QPSK waveform and CTC Forward Error Correction Anti-Jamming / Anti-Spoofing / Video CODEC - Anti-Jamming Capability using DSSS - Anti-Spoofing Capability by AES-256/ ARIA-256 Encryption - Support H.264 / up to 1920x1080x30f Interface - 10/100 Base-T Ethernet x1, RS-422 x1, RS-232 x2 - 3G-SDI Digital Video IN/OUT Interface - Limited Discrete I/O (1PPS/sync_in, reset_in, status_out) ㅇQuality and Certification - MIL-STD-810G - MIL-STD-461F

NarSha is a dedicated small satellite for monitoring methane (CH₄) emissions, a key contributor to the climate crisis. It is the first satellite of its kind in South Korea to be developed and led by a private company. The launch of NarSha-1 is targeted for the fourth quarter of 2026.

Collects data from various sensors within the aircraft system, converts it into the required format, and transmits it to the mission computer or flight control computer. Converts control commands received from the mission computer or flight control computer and relays them to sensors and other peripheral devices. Supports system control functions, monitors the status of key systems, and provides feedback. Achieves 70% cost competitiveness compared to equivalent-performance products. - x2 MIL-STD-1553B - x2 UART (RS-422/485) - x24 Analog input interfaces - x8 Analog output interfaces - x64 Discrete input interfaces - x40 Discrete output interfaces - Size : 270 x 270 x 62.2mm - Weight : 2.5Kg - Power : MIL-STD-704F (28VDC, 10W) - Environment : MIL-STD-810G - EMI/EMC : MIL-STD-461G

This Ka-band antenna and data transmission device incorporates electronic beam steering antenna technology and software-defined radio technology as part of the Ka-band downlink system for satellites. It serves as a key component of data downlink systems within the satellite payload, supporting high-speed data transmission. The device enables system optimization through miniaturization, lightweight design, and single-unit modularization.

Kencoa has a presence in the space industry through specialized material supply, high-precision component manufacturing, and strategic investment in New Space technologies.

The ACTUS® ARKS11 (1–10X, 24mm FFP) Riflescope is engineered for precision and durability, meeting the demands of professional users across diverse environments. Featuring a First Focal Plane (FFP) optical design, it provides fast and accurate target acquisition at any magnification level. The illuminated reticle ensures clear and reliable aiming, even in low-light conditions such as dawn or dusk. Built for versatility and performance, the ACTUS® ARKS11 is the ultimate optic for users operating in dynamic and challenging environments.

◾ Drive Motor : Electric motor installed in the Explosive Ordnance Disposal (EOD) Robot to supply power for driving. ◾ Flipper Motor : Electric motor that supplies power for driving the flipper of the Explosive Ordnance Disposal (EOD) Robot.