< Frequency Range > ● LB-400: 400 ~ 460MHz ● LB-900: 800~928MHz ● MB-1500: 1300~1500MHz ● MB-2400: 2400 ~ 2500MHz ● HB-5.2: 5150 ~ 5250MHz ● HB-5.8: 5725 ~ 5875MHz < TX path output Power (at antenna port) > ● Normal mode: 35dBm [min] ● On each antenna port 2x 35dBm ● Interference mode: 40dBm [min] < TX path maximum Input Power > ● +20 dBm < RX path Gain > ● 25dB typ. < RX path Noise figure > ● Low bands: 3dB max. ● High bands 3.5dB max. < RX path IIP3 > ● -10dBm typ. < RX IP1dB compression point > ● 15dBm typ. < Power Supply > ● +24V ± 1 Vdc

The SC-SBCRTM-V2 is a Rear Transition Module (RTM) designed to extend the I/O functionality of the SBC6511 single-board computer. Mounted on the rear side of the main VPX backplane, this module provides additional I/O expansion through Micro-D and D-sub connectors for synchronization signals, two Ethernet ports, two Mini-DisplayPort video outputs, two USB interfaces, and MMCX connectors. It enhances system flexibility and connectivity for embedded and radar signal-processing applications.

The Euroflir™ 410 family allows fixed, rotary-wing aircraft & UAV to carry out, in any conditions, intelligence, protection, search and rescue missions thanks to long-range observation and accurate targeting and designation capabilities. Very-high-resolution multispectral cameras Euroflir™ 410 operates in four spectral wavebands - TV, NIR, SWIR, MWIR – with a wide field-of-view and ultra-long-range observation, allowing it to function at standoff distance any time day or night. The Euroflir™ 410 is specially adapted to the wide variety of missions: supporting law enforcement, homeland security, border and coastal surveillance, intelligence, SAR and CSAR. Euroflir™ 410 : a modular system in 3 main versions EuroflirTM 410 Surveillance: eyesafe target range measurement and 3D location-determination. EuroflirTM 410 Marking: target marking for either crew members or allied ground forces with night vision goggles. EuroflirTM 410 Designation: accurate designation with suitable laser coding for laser-guided weapons. Advanced embedded functions Improved situational awareness: moving map & augmented reality (visualize the line-of-sight, define points of interest on a digital map, real-time video). Automatic detection: Moving Target Indicators (MTI) & Hot Spot Detection (HSD). Enhanced identification: Super resolution & Fusion.

The fully redundant DA 30-HT-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The position sensor features a three channel design (for 2 out of 3 voting). Additionally, there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485.

The Nebula connector employs the renowned Hypertac hyperboloid contacts as the bedrock of its high reliability providing immunity to shock and vibration fretting and over 100,000 mating cycles. These features combine with current carrying capacity up to 1.5 Amps per contact and low insertion / extraction forces to provide significantly enhanced quality and reliability performance compared with other more commodity connector solutions. Available for direct mounting to PCB, the Nebula Series supports independent function for all its 22 contacts. It also offers optional quarter-turn locking hardware for faster connector securing and to prevent unintentional separation.

Built with a rugged design and clear display, the TACNAV UMD offers: Highlights Active dot-matrix design, delivering unparalleled flexibility User-friendly interface with easy-to-read icons, messages, and pop-up menus Features Generation III NVG (night vision goggle)-compatible Four “soft keys” for easy operation Interchangeable with both Commander’s and Driver’s Displays, reducing logistics and cost Military standard approved for outstanding performance and reliability Ideal for integration into digital Battle Management Systems Compatible with all existing and future EMCORE TACNAV systems Applications Military vehicle requiring a user-friendly interface for its tactical navigation system The TACNAV UMD is controlled by the Arms Export Control Act (Title 22, USC Sec 2751 et seq.) and the International Traffic in Arms Regulations, ITAR 22 CFR 120-130, and may not be exported from the United States or disclosed to a foreign person in the United States except as authorized by those regulations.

- Form factor: 6U VME64x - Processor: Intel® E3-1505Lv6 2.2GHz 4 Cores and 8 Threads - Memory: 16,000MB DDR4 SDRAM w/ECC, (1) 73GB up NVMe SSD

Designed with durability in mind, the SG20BL is equipped with a robust M8 circular connector, hardened steel gears and an impressive IP-68 rating, ensuring it can withstand harsh environmental conditions while maintaining optimal performance. With a Mean To Time Failure (MTTF) of greater than 1,000 hours, users can trust our servo to deliver consistent functionality throughout its operational lifespan. Available in both a 12V and 24V model with wide operating voltages of 9-15V and 18-32V, respectively, the SG20BL also features an ultra-efficient brushless motor delivering exceptional power-to-weight ratio and a contactless magnetic encoder offering enhanced responsiveness. The implementation of CAN 2.0A,B / DroneCAN command protocols further streamlines communication and integration with advanced unmanned systems. #UAV #UAS #UGV #UUV #USV