The Transmit/Receive Module splits 2 transmit input channels into 32 output channels. Each channel delivers an output power of at least 3.2 W with a transmit efficiency of 35.5% or higher. It features independent phase control for each transmit channel. On the receive side, 32 input channels are combined into two output channels. The total receive gain is 34 dB or greater, and each channel supports individual gain and phase control. The noise figure is 3.5 dB or lower per channel. Built-in monitoring functions include internal temperature monitoring and output signal monitoring.

characteristicRear wheel drive type (5 forward speeds, 1 reverse speed) Cable Remote Control Type 2nd and 3rd speed Triple Synchro applied apply2.5-ton trucks and medium-sized buses, 3.5-ton trucks and medium-sized buses

The SC-HPCRTM is a Rear Transition Module (RTM) designed to extend the I/O functionality of the HPC2812 high-performance computing board. It can be mounted on the rear side of the VPX backplane to enhance system connectivity and I/O flexibility. Since the HPC2812 board consists of two computing nodes, the SC-HPCRTM provides dedicated interfaces for each node, including Ethernet, USB, MMCX, and Mini-HDMI ports, ensuring optimal data communication and display output performance in mission-critical embedded systems.

Our in-vehicle monitoring solution applies VLM-powered indoor and outdoor cameras to deliver real-time driver and passenger awareness. By integrating AI models such as facial landmark and head pose detection, gaze tracking, object recognition, and human pose estimation, the system supports safety features like drowsiness detection, distraction monitoring, and surrounding object awareness. Optimized for automotive SoCs including Qualcomm, and running on QNX RTOS and Linux, our solution combines model compression, embedded optimization, and a streamlined development pipeline. This ensures reliable, low-latency performance tailored for next-generation connected and intelligent vehicles.

Designed to support U.S. DoD modernization strategies, REDCOM Sigma is a complete software-based Command & Control solution with voice, video, chat, and conferencing. REDCOM Sigma® increases the warfighter’s operational flexibility while reducing size, weight, and power (SWaP) requirements at the tactical edge. REDCOM Sigma is based on open standards with a focus on interoperability, flexibility, and ease of use, and is listed on the DoDIN Approved Products List (APL). REDCOM Sigma was selected by the U.S. Army’s Program Executive Office Command, Control Communications-Tactical for network modernization at the tactical edge. Sigma is being deployed to multiple programs within the U.S. Army at the battalion level and below.

The FLIR 380X upgrade sets the new standard for law enforcement mission support. Learn more: https://www.flir.com/surveillance/flir-380x-upgrade/

Hypertac Green ConnectTM Contact Technology offers a Lead-free and Beryllium-free high power contact solution with unparallel low contact resistance. The lower contact resistance of the Hypertac Green Connect hyperboloid contact reduces heat build-up allowing the contacts able to handle far greater current in smaller contact assemblies without adversely effecting temperature rise. Thanks to the improved crimp design of the socket offering an increased contact area between the contact body and the multi-stranded cable, Hypertac Green ConnectTM solution can offer an unrivalled low contact resistance.