This product supports the following transmission standards. Designation Bit Rate ========== ========== CXP-1 1.250 Gbps CXP-2 2.500 Gbps CXP-3 3.125 Gbps CXP-5 5.000 Gbps CXP-6 6.250 Gbps CXP-12 12.500 Gbps The CXR-2C amplifies and transmits image signals from 1/2-channel CoaXPress cameras to a PC frame grabber. Typically, transmission matches the distance between the camera and the device. Transmission distance depends on the coaxial cable type, and due to significant variability, specific distances are not provided.

This tactical multi-purpose carrier is an oversized 250L (55cm x 43cm x 111cm) rolling duffel bag, the first of its kind in Korea. It can store drones, portable communication equipment, duty/training gear and accessories, firearms, body armor, battle belts, helmets, tactical vests, and personal gear all in one, making it the first tactical carrier of this type in Korea. The bag allows easy access to necessary equipment during operations, thereby enhancing the efficiency of both missions and training. The exterior features a total of 10 pockets (5 on each side), including dedicated ammunition storage pockets, enabling systematic management of equipment and flexible deployment. Made of high-strength 1000D Cordura nylon, the material resists deformation even after long-term use, and its water-resistant coating protects equipment from rain, dust, and daily wear.

- Integrated control of two zones: engine bay and crew bay - Equipped with a self-diagnostic function for key AFSS components - Capable of interfacing with the vehicle computer - Adjustable temperature setting for engine bay fire detection

Maximum Control for your interactive graphical displays. Developing HMIs for safety- and mission-critical avionics and embedded displays only gets more demanding. VAPS XT offers HMI designers, systems engineers, and embedded engineers maximum control and flexibility for creating interactive real-time graphical displays for avionics and other safety-critical embedded applications. With an open architecture and integrated logic capabilities, VAPS XT provides the essential features for the design and deployment of certifiable cockpit displays. VAPS XT provides a model-based environment supporting all phases of development from initial concept to embedded deployment. Through a flexible porting structure, VAPS XT applications can be easily deployed to virtually any embedded target with excellent performance.

MDCX, multipin coax connectors, offer low VSWR of 1.25:1 (typ) up to 10 GHz (max mated pair), maximum overall diameter of 0.125" fitted into low-profile micro-D housing, with constant 50 Ohm airline impedance. MDCX coaxial contacts are compact in size allowing multiple high density connections in a Micro-D style shell for applications where space and weight savings are important. No cumbersome spring mounts are required. These connectors are also available with locking post mechanisms or blindmate hardware attachment.

Engine modules for Rolls-Royce (Allison) Model 250 gas turbine engine series. Maintenance, repair, overhaul, rentals, exchanges, sales and service.

Model-Based Systems Engineering (MBSE) is a methodology that integrates design, analysis, and verification activities throughout the system lifecycle using architecture models. By modeling requirements, functions, structure, and behavior, MBSE supports consistent and informed decision-making. Ansys SAM (System Architecture Modeler) supports the latest system modeling language, SysML v2, and enables both graphical and textual modeling, real-time collaboration, and model management. Ansys ModelCenter integrates various engineering tools and builds automated workflows, enabling what-if simulations and trade studies. By connecting architecture models with simulation models, it supports consistent design analysis and requirements validation using a single source of truth (ASoT).

Investigate the smallest of features with spatial resolution down to 600 nm – A state-of-the-art nano-focus x-ray source, precision stages, and high-quality detectors work together to deliver sub-micron resolution imaging. Perform true 4D imaging with Dynamic CT – High temporal resolution, continuous and uninterrupted scanning, and specialized 4D software tools bring synchrotron-like capabilities to the lab. Implement 3D in situ experiments – continuous sample rotation and scanning enable uninterrupted in situ experiments. Dedicated “no-cable-wrap” interfaces simplify experiment set-up. Accommodate a broad range of samples – UniTOM HR’s high power source (50W), multiple detector options (up to 3) and heavy load stage (45 kg) accommodates samples up to 500 mm diameter X 700 mm high. Maximize system utilization and throughput – A fast frame rate detector and a high flux x-ray source combine for high temporal resolution tomography giving you the ability to scan more samples and accommodate more users.