30년+ 위성통신 경험을 바탕으로 VSAT 허브/모뎀과 광대역 SATCOM을 제공하며, 전술 방산·정부, 이동통신 백홀, 방송 등 다양한 미션 요구에 최적화된 솔루션을 제공합니다.

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

- Reduced weight and manufacturing cost by more than 30% compared to conventional metallic propellant tanks - Designed and qualified to according KARI requirements - Proof & burst pressure application - Cyclic pressure(MEOP, Max. Enveloped Operating Pressure) application, more than 40 cycles

Combined laser scan/video scope technology for gun barrel inspection, superior measuring results: With the RIB 4D, Kappa presents a new, high-performance system for large-caliber weapon barrel inspection designed for troops evaluating actual and post-firing status and calculating remaining service life. 3D Laser Scanner and 360° Videos: Within the completely newly designed RIB 4D measuring head, the entire bandwidth of the newest image-generating technology for seamless, complete barrel inspection is used. A supersensitive laser scan generates a detail-rich point cloud. In addition, 8 CMOS sensors provide the viewer with brilliant 360° videos of the barrel’s interior surfaces. The highly precise barrel digitization offers a comprehensive data basis for secure assessment of a barrel interior’s condition. Keeping it simple: only one operator required Simple handling means that just one person can operate the entire system. Independent of the operator, the automatic system delivers clear and reproducible measurement results. The barrel digitization is the reliable data basis for the subsequent location-independant assessment of the barrel condition. The compact system is designed for versatile use. One system for multiple barrel types and diameters RIB 4D is made for smooth and rifled barrels. With adapter rings, the system can easily be used for different calibers. The current RIB 4D version covers the range from 120 mm to 155 mm. Another version for smaller diameters is in preparation. Ultra-fast fully-automated barrel digitization (< 30 min.) The RIB 4D completes the entire high-resolution and precise measurement of the inside of the gun barrel sensationally fast in under 30 minutes (example Leopard 2), which speeds up and largely automates maintenance for system users and thus simplifies it to a great extent. Interactive Software for Reliable Assessment: The extensive data of the inspected surface is analyzed in the user-friendly application software and can be documented and evaluated as a report according to the service regulation TDv018. The interactive interface supports the detection and measurement of critical damaged areas and the final evaluation of the barrel condition and the determination of the remaining service life. Digitization of the inner barrel surface and precise measurement of damaged areas: The analysis covers erosion, corrosion, damage to the chrome coating including diameter measurement of the fields and lands and groves on rifled barrels. Complete solution all-in-one: The non-contact RIB 4B inspection system consists of the sensor head, the drive unit, the container with the drive chain, the server, the analysis laptop and extensive accessories. An unrivaled level of experience: We are the pioneering supplier in the area of gun barrel inspection; we know our customers’ requirements inside and out. Rely on our state-of-the-art systems based on modern technologies and decades of experience. Versatile use: Suitable for all smooth and rifled tubes in diameters between 120 mm and 155 mm used in tanks, artillery systems and naval guns. Reliable detection of damage Precise scanning of the damaged areas - quick location - simple measurement The system includes the noxRIB4D application software for system control, surface inspection and reporting. In the first step, the pipe is completely digitized on site with RIB 4D. Based on the data, the subsequent analysis can be carried out in the software independent of location. The noxRIB4D software offers two analysis screens, the Heat Map and the Intensity Map, for precise damage analysis. Finally, the analysis results are reported in Excel or TDv018 with evaluation of the barrel condition. COTS product: Direct market availability RIB 4D for 120 mm and 155 mm. Other diameter sizes with minor adjustments without new development.

Powerful multi-tasking capacity for higher productivity • Even higher multi-tasking capability is available from SMX machines through the combination of the left and right spindles, the B-axis milling function and a lower turret ideal- making the machines ideal for complex, high-precision machining. • Orthogonal structure maximizes machining space. • 12 station high-rigidity servo turret ensures accurate and powerful cutting performance, and outstanding process reliability. Outstanding control delivers higher precision • 0.0001-degree precision control function of B-axis and C-axis enables high-precision machining. • Minimized thermal displacement of the spindle and feed axis by the optimized cooling solution and smart thermal compensation ensure high precision even during long machining runs and extended use. Easy and convenient functions • Front located tool magazine and convenient ATC operation panel make it easy to change and replace tools, and monitor and check tool change operations. • Side-to-side movable swivelling operation panel with adjustable height settings. User friendly work guidance function. • User friendly work guidance function.

Ski-Doo·Sea-Doo·Can-Am 등 아이코닉 브랜드를 보유한 글로벌 레저 모빌리티 선도기업으로, 스노모빌·수상 레저·ATV/사이드바이사이드·3륜 모토사이클과 Rotax 엔진까지 폭넓은 제품군을 제공합니다. 방위 산업업체와도 협력을 모색합니다.

All units are equipped with a microprocessor-based MPCU controller that manages diagnostics, protection, and optional energy consumption monitoring systems. EAR rectifiers are trusted across ground support zones, hangars, and field operations.

Our AT4 family is one of the most successful anti-armour weapons ever. Lightweight, man-portable and fully disposable weapons, each is optimised for anyone to use.