Generates 2D electronic map images using a terrain database and transmits them to the mission computer via the ARINC-818 standard. Using Collins Aerospace's TERPROM software, enabling automatic terrain-following flight and terrain collision avoidance functions. - x2 Gigabit Ethernet - x1 MIL-STD-15583B - x4 Discrete Input - x2 Discrete Output - x4 ARINC-818 Transmit - 512GB Solid-State Disk (Digital Moving Map) - 64GB Solid-State Disk (TERPROM) - Size : 135.1x339.0x225.4 mm - Weight : 4.25Kg - Power : MIL-STD-704F (28VDC, 60W) - Environment: MIL-STD-810G - EMI/EMC: MIL-STD-461G

Hydraulic top bracing is an attenuation device installed between the main engine and the hull of the ship to reduce thermal expansion and vibration from the main engine to natural frequencies. The operating principle is an automatic control operating system through in/out and on/off the operating range of the hydraulic top bracing according to the rpm of the main engine. The number of hydraulic cylinders per engine is typically 2, 4, 6 depending on the type of engine, up to 8 are installed if necessary, and 1~2 of control panels are installed.

Spring probes provide reliable electro-mechanical performance through hundreds of thousands of cycles. They are available in a variety of sizes, spring forces and terminations. Smiths Interconnect compression mount connectors utilizing spring probe technology offer tremendous advantages in reliability, performance and efficiency in comparison to conventional technologies like stamped metal, wire mesh, pin-and-socket or elastomer. Standard spring probes offering includes battery contact and connector probes designed to optimize contact performance in high-reliability, multiple-cycle interconnect applications.

The AGTR-NEO is engineered for dynamic applications, offering a high sampling rate for single-channel measurements and efficient multi-channel acquisition. Its DO-160G qualification underscores its suitability for aerospace integration. Key Features: - 8 Optical Channels, sequential sampling - 19.2 kHz Single-Channel Sampling, 50 Hz for 8 channels - DO-160G Qualified - Onboard Data Processing and Storage: Integrated miniature single board computer for efficient data handling. - Compact and Lightweight - Flexible Mounting: Designed for easy installation with multiple M4 mounting points. - Ethernet Communication: Supports TCP or UDP protocols. - ARINC 801 Optical Interface: Ensures compatibility with aerospace communication standards.

Collects data from various sensors within the aircraft system, converts it into the required format, and transmits it to the mission computer or flight control computer. Converts control commands received from the mission computer or flight control computer and relays them to sensors and other peripheral devices. Supports system control functions, monitors the status of key systems, and provides feedback. Achieves 70% cost competitiveness compared to equivalent-performance products. - x2 MIL-STD-1553B - x2 UART (RS-422/485) - x24 Analog input interfaces - x8 Analog output interfaces - x64 Discrete input interfaces - x40 Discrete output interfaces - Size : 270 x 270 x 62.2mm - Weight : 2.5Kg - Power : MIL-STD-704F (28VDC, 10W) - Environment : MIL-STD-810G - EMI/EMC : MIL-STD-461G

KJF makes comprehensive efforts to satisfy our customers with cost effective, high quality and on-time delivery support. KJF fabricated radar platform and shelters of KMSAM

Signaty X IR Helmet Strobe is a next‑generation, domestically developed IFF LED device. It features IR plus RGBW color LEDs (red, green, blue, white), all housed under a high‑strength polycarbonate dome. It supports multi‑wireless synchronization via short‑range communication, GPS/RTC, and mesh relay—enabling simultaneous use of RGB LED + IR or RGB LED + white LED, with up to 42 pattern synchronizations (expandable to 252) using 256‑bit encrypted data. Runtime reaches up to 130 hours (LED 130 h / IR 125 h) on a single AA battery. Built to MIL‑STD‑810G and KC standards, it ensures drop, dust, sand, immersion, and temperature resistance. Manufactured in Korea with domestic service support.

ORSKOREA’s cylindrical grinding machines are engineered to deliver superior surface quality and tight tolerances for high-value parts. They are widely used in aerospace, defense, automotive, medical, and electronics industries for components that demand both strength and precision—such as engine shafts, landing gear parts, gears, and bearings. Key Advantages • Handles diverse, small-batch productions with consistent repeatability • Exceptional dimensional precision for tight-tolerance parts • Supports tapered and curved surface grinding • Flexible workpiece capacity with swing up to 350 mm • Smooth table movement with low noise and vibration for stable operation By combining precision, versatility, and long-term reliability, ORSKOREA’s cylindrical grinders provide manufacturers with the performance needed to meet mission-critical requirements.