Supports non-destructive inspection of aircraft composite skin structures and is composed of a piezoelectric layer sensor, data acquisition equipment, and damage analysis software. Utilizes piezoelectric sensors to generate Lamb-wave and acquire signals, collecting data to accurately detect and assess composite damage. Visualizes inspection results on display such as damage location, size and index. - POD Accuracy: 1 inch 90% or more - POD Precision : Position error within 30 mm - 64 channels / 230 path reference detection time within 10 minutes - Sensor : Resonance resistance less than 400kΩ - Sensor : MIL-STD-810G - Sensor : RTCA DO-160 Section 23.0 - DAQ : x128 Piezoelectric sensor interface

Features ● Wideband Frequency Range of 2.0~18.0GHz ● Rigid Construction with AL Brazing ● Monotonic Beam Shape, No Beam Split ● Optimized Gain Ripple and VSWR Applications ● General Purpose TX/RX Antenna ● EMC Testing ● TX/RX Antenna for EW Testing ● Wideband TX Antenna for Anechoic Chamber

Our ultra-premium MDB961WP is engineered with an efficient brushless motor and magnetic encoder delivering uncompromised performance and reliability. Operating at a wide voltage range from 8V up to 32 volts, this powerhouse actuator produces massive torque and high speeds with 32-bit digital programmability and IP-67 waterproof rating. Perfect for DroneCAN (UAVCAN v0) command protocols, the MDB961WP is ideal for industrial applications requiring unbeatable precision, strength and durability. #UAV #UAS #UGV #UUV #USV

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The CLR-30 amplifies and transmits Camera Link signals in Base/Medium/Full configurations (up to 10 Taps supported) from a camera to a PC frame grabber. Key Features  Fully supports the Camera Link interface (Area/Line Scan).  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL).  Supports pixel frequency from 20 to 85 MHz.  Supports 10 Taps cameras.  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Supports PoCL signal bypass (patented).  Features a locking DC power jack (Molex) and SDR connectors.  Compact size compared to previous models.

Threaded bushing enables localized reinforcement of and attachment to panel structure. Supplied with disposable installation fixture. 1.25" Flange Diameter. SIZES: Imperial fine thread sizes from 10-32 (.190"-32) to 3/8-24 (.375"-24), Imperial coarse thread sizes from 8-32 (.164"-32) to 3/8-16 (.375"-16), and metric thread sizes from M5 to M8. 1.25" Flange Diameter. Grip lengths from 0.25" to 1.50". MATERIALS: Aluminum, 300 Series Stainless Steel, A-286 Stainless Steel, 316 Stainless Steel, and Titanium. Optional epoxy primer. FEATURES: Standard 1.25" diameter flange, 0.75" x 1.25" trimmed flange optional.

ORSKOREA’s thread grinding machines are designed for high-precision machining of both internal and external threads, covering a wide range of thread profiles and dimensions. These machines are critical for producing aerospace fasteners, defense system parts, precision ball screws, and other components where accuracy and durability are vital. Key Advantages • CNC Control: 4-axis (SGTE) and 5-axis (SGTI) for complex thread profiles • High-rigidity structure minimizing vibration and thermal distortion • Built-in dressing and balancing units for consistent quality By shortening processes and improving efficiency, ORSKOREA’s thread grinders reduce costs while enabling high-value, high-accuracy production. They also serve as advanced domestic alternatives to imported machines, strengthening localization and export competitiveness.

Woori DS Co., Ltd. has developed firmware for a cooling and heating air conditioning system that performs all controls, fault diagnosis and communication for heating and cooling control and positive pressure control inside an armored vehicle, and developed an inverter control device capable of controlling communication with the armored vehicle body system and monitoring error situations. We are developing products based on the best technology and competitiveness to satisfy customer requirements for electrical equipment required for armored vehicles. In addition, we have developed an air conditioning system blower durability test device that can test the durability of air conditioning blowers, and we have secured test and evaluation technology for blower durability by checking blower errors and performing cycle management. By continuously securing innovative technologies in the defense industry, we are expanding our electronic device development business to deliver new value and impress customers with the highest quality and trust from product design, development, and mass production.

In addition to stocking common grades, shapes and sizes, PASU has a full inventory of nonstandard sizes. Progressive’s multiple value-added processing capabilities provide the ability to supply near-net products resulting in reduced machining time. From 2 stocking locations (Hartsville, South Carolina & Las Vegas, Nevada) the company efficiently supports the North American market, with close proximity to international airports and major shipping ports on the east & west coast of the USA providing exceptional service to the global market. Progressive’s AS9100D Certified quality system is complemented with many major OEM Approvals including Pratt & Whitney - LCS. Specialty products include round bar, flat bar, plate & forgings in the following alloys: 17-4PH & 15-5PH 13-8MO 13-8 Supertough® 4340M (300M), 4330M, 4340 VAR Cronidur 30® Custom 455® & Custom 465® 440c & 440c VAR Value added processing capabilities include: Production cutting up to 22" diameter Plate processing up to 24" x 72" x 170" Waterjet cutting & near-net shape processing Grinding, trepanning & gun drilling Heat treating, destructive & non-destructive testing