1. Maintenance • Depot Maintenance • Structure & Avionics Replacement, Repair, Wire Harness, Test and Inspection 2. Upgrade & Modification • Structure Upgrade and Modification • Avionics Upgrade, System Integration, Test and Inspection Highlights √ Final Assembly incl. Engine Installation √ System Integration, Test & Inspection Project Highlight : KT-100 & Light Sport Aircraft (Final Assembly), HH-60, CH-53, CH-47, F-16, P3-c, C-130H, AS-1S, MD500, NG RQ-4B ( Logistic & Ground Support)

- Fire response time: 0.004 seconds - Fire monitoring range: cone angle of 90° or greater - Equipped with self-diagnostic function - Capable of distinguishing between major fires and minor fires

The Haigh-Farr Wraparound™ is a self-contained omnidirectional antenna for cylindrical or conical shaped bodies. A single point feed is used and no external splitters, combiners or cable harnesses are required for installation. The antenna is conformal, and may be mounted flush, or on the exterior of the vehicle. Designs are available from 300 MHz to 13 GHz with typical applications including Flight Termination, GPS, Telemetry, Data Links and Transponder. Multiple antenna elements may be combined within the same physical Wraparound™, providing multi- band capability in a single, compact package. Wraparound™ antennas have been flown on vehicles from subsurface sea to space, including high-mach kinetic kill weapons, high-G projectiles and re-entry vehicles. The Wraparound™ has been qualified for use on several high performance vehicles flown on test and launch ranges throughout the United States and Europe. For high aero-heating applications an ablative heat shield may be added to the antenna for additional thermal protection.

Designed for existing in-service EGI upgrade and compatibility with open architecture requirements. Perfectly suited for military helicopters, aircraft, fighter jets and UAVs, the BlackNauteTM Embedded GNSS and Time INS (EGTI) sets the new standard for resilient navigation performance.

- An updated model of the Heron UAV Strategic and versatile aircraft capable of carrying diverse payloads - Can reach an altitude of 35,000 feet, speed of 150 knots and remain in the air for 45 consecutive hours - Wide and strong body structure, allowing for quick and easy maintenance without adding to its weight - Enables new configurations, as long-range observation sensors and radars

The new Super-TAC IMU integrates three fiber optic gyros that exceed tactical grade performance with three high-accuracy Micro-Electro-Mechanical Systems (MEMS) accelerometers and state-of-the-art support electronics in a single small, lightweight package. This solution addresses the need for superior inertial performance in a tactical- grade package, critical for operation in GPS denied and contested environments. The Super-TAC IMU measures change in velocity and angle, utilizing a configurable variable synchronous data link control (SDLC) digital serial bus. The Super-TAC is configured to offer customers the best value solution when designing new systems as well as provide the flexibility to upgrade existing platforms. The Super-TAC IMU employs state-of-the-art optics with fewer components, providing significant performance and reliability improvements across standard military environments. Background Emcore, located in Budd Lake, NJ has been designing, developing and producing inertial components, sensors and navigation systems for Space, Ground, and Avionic applications for over 35 years. Emcore has been developing Fiber Optic Gyros (FOGs) since the early 1990s, producing and delivering IMU products with performance ranging from tactical to strategic grade PERFORMANCE GYRO PERFORMANCE Bias Stability < 0.05 °/hr. (1σ) Angle Random Walk ( ARW) ≤ 0.01 °/√hr. (1σ) Scale Factor Repeatability ≤ 100 ppm (1σ) Scale Factor Linearity ≤ 50 ppm (1σ) Angular Rate Range 1,000 °/sec Acceleration Range 100,000 °/sec2 ACCELEROMETER PERFORMANCE Range ± 25 g Bias Variation ≤ 50 μg (1σ) Scale Factor Stability ≤ 300 ppm (1σ) SYSTEM PERFORMANCE Bandwidth (adjustable) 800 Hz (gyros) 150 Hz (accelerometers) MTBF >25,000 hr.

Modern avionics and vectronics rely on high data rate digital networks. As the demand for these networks keeps rising with new advances in aviation and military technologies, GORE® High Speed & Data Rate Cables from W. L. Gore & Associates provide the fast speeds and excellent signal integrity needed to support current and next-gen critical systems.

MPS Microsystems is specialized in manufacturing high-precision, miniature linear bearings. We offer a comprehensive range of exceptionally smooth bearings with bore diameters from Ø 2 mm to Ø 6 mm. The balls of these precision bearings meet ‘Grade 3’, the highest quality defined by the ISO 3290/DIN 5401 standard. Combined with a cage and a high precision casing, they allow rapid positioning while reducing friction and eliminating the stick-slip effect. The standard version of MPS Microsystems linear bearings consists of a stainless steel bushing and balls, and a brass cage. An all-stainless steel version or one with ceramic balls can be made on request.