Stable operation through precise current/temperature control for up to 4 channels. Customer-tailored GUI, real-time monitoring, and remote control.

InspecX is a next-generation autonomous swarm inspection system for aircraft. It is addressing challenges in the $100B global aviation maintenance market. Airlines face a shortage of certified technicians, with Boeing projecting demand for over 700,000 by 2044. Aircraft-on-ground (AOG) incidents cost $10,000–$150,000 per hour, making downtime reduction critical. InspecX uses swarm coordination and LiDAR-based SLAM to perform safe inspections in GNSS-denied or indoor environments. It reduces required technicians from 9 to 3 and inspection time from 10 hours to 3, achieving over 50% cost savings for large aircraft. Beyond efficiency, InspecX helps airlines avoid AOG losses, accelerates maintenance cycles, and improves airworthiness. By maximizing fleet readiness and ensuring reliable operations, it provides a scalable, future-proof solution. InspecX is positioned to become the new global standard for aviation safety and maintenance in the era of intelligent mobility.

As successor to the best-selling JIM LR, JIM Compact offers even more advanced capabilities at a weight of less than 2 kg, providing users with the best performance-to-weight ratio of any device in its class. Intuitive, durable and modular, JIM Compact gives land and special operations forces everything they need to enhance their situational awareness at any time.

We are Hyundai Steel, a member of Hyundai Motor Group, developing advanced composite parts for aircraft and AAM, with a focus on both structural and exterior applications. Using our rapid press-forming process, we can manufacture high-quality components in under 30 minutes, enabling faster production cycles and reliable performance. We also bring prior experience in small-scale production of automotive composite parts, strengthening our expertise across industries. If you are seeking to enhance the productivity of your composite parts, please feel free to contact us anytime for collaboration.

PELICAN-D LW is a 640x512 elements, 15μm pitch, Type-2 SuperLattice (T2SL) technology based 2D Long Wave Infrared (LWIR) digital IDCA. The new ROIC outputs digital signal, similarly to SCD’s previous digital detectors: Sebastian-320, Sebastian-480, Sebastian-640, Pelican-D, Hercules, and Blackbird. Pelican-D LW is available in the same configurations as the standard (MW) Pelican-D, with a large variety of cold shield apertures and cooler types. The proximity board provides the FPA timing and sensitive power supplies. Camera-Link interface highly simplifies the integration of the detector to the system.

REP series is easy to use for quick mating. The REP panel and cable connectors are a highly cost-effective interconnect system, which solves the constant need for simple and reliable connector solutions in rail applications. A full plastic solution offered in either wire attachment or PCB mounting options to provide rapid assembly installation without requiring additional mounting hardware. Cable receptacle connectors are available to mate with the cable plug connectors for cable-to- cable solutions when needed. The series is qualified to French and European rail standards. The connectors are available as one overmolded plastic part to save assembly time.

Inserts are used in the aerospace industry in lightweight sandwich panels and are then bonded. The panels can then be screwed or various components can be fastened. However, the manual process has several disadvantages: Enormous expenditure of time for the manual filling of several thousand inserts, high material waste due to relaxation of the material, and high material costs through the use of cartridges. ViscoTec can map the filling process automatically. The dispensing process is absolutely precise. A significant amount of material can thus be saved. In addition, material can be supplied from large containers, which in turn lowers purchase prices. Another important advantage: As a rule, no new specifications have to be made since no changes are made to the actual process.

Our LiDAR uses a custom-designed laser that separates 1064 nm and 532 nm wavelengths from a single source, with two dedicated receivers capturing each set of data independently. Inside the system, the linear laser beam is refracted at a 10-degree angle through a prism to enable circular scanning. An RF module is also integrated for real-time equipment status monitoring. From circuit board design to component selection, every part of this system was developed in-house by multiple institutions. As a result, we have successfully eliminated reliance on foreign technology.