AuraGen® ... Unlike a traditional generator, this induction power system fits under the hood of a vehicle and can generate enough pure sine wave electricity to handle your power needs. The AuraGen's safety, reliability, portability, virtually silent operation, and convenience make it ideal for use during everyday commercial work or anywhere that conventional power is absent. No maintenance, no theft problems and no hazard for employees means higher productivity and higher profits. The AuraGen® comes complete with the AuraGen® power source, electronics, idle control, and mounting bracket and provides an environmentally friendly alternative to heavy polluting gensets. AuraGen® is available for most fleets, municipal and work site vehicles as well as full-sized pickups and SUV's.

The HPC2812 is a rugged 6U VPX high-performance computer aligned with the compute-intensive SOSA profile, delivering top-tier processing with dual Intel® Xeon® D-2700 (Ice Lake-D) processors and flexible expansion capabilities. • Supports up to 128 GB DDR4 SDRAM with ECC and 480 GB NAND Flash (NVMe SSD) per node • Offers 2× 100 GbE (or 4× 40 GbE) data plane with RDMA, PCIe Gen 4 expansion plane, plus control and management plane support • Features the Xilinx® Zynq® UltraScale+™ MPSoC FPGA for enhanced security

PELICAN-D LW is a 640x512 elements, 15μm pitch, Type-2 SuperLattice (T2SL) technology based 2D Long Wave Infrared (LWIR) digital IDCA. The new ROIC outputs digital signal, similarly to SCD’s previous digital detectors: Sebastian-320, Sebastian-480, Sebastian-640, Pelican-D, Hercules, and Blackbird. Pelican-D LW is available in the same configurations as the standard (MW) Pelican-D, with a large variety of cold shield apertures and cooler types. The proximity board provides the FPA timing and sensitive power supplies. Camera-Link interface highly simplifies the integration of the detector to the system.

The VPX3-C11 which provides a full 3U OpenVPX(VITA 65) is a Single Board Computer(SBC) that combines the power, versatility, cost-effectiveness of the 11th generation Intel Xeon W processor and RM590E PCH chipset with the reliability. VPX3-C11 is based on the Intel Xeon W- 11865MLE CPU that has 8 cores running at max 4.5GHz and providing 32Gbytes of high-bandwidth DDR4 SDRAM. Intel Xeon processor includes an integrated Intel UHD Graphics 11th Gen(32 EU) graphics engine, providing discrete GPU performance with OpenGL for graphicsintensive applications. For storage application VPX3-C11 provides the built-in 80GB SLC NVMe SSD solution via PCIe x4 lanes as well as the external SATA expansion through VPX site. The VPX3-C11 satisfies the demanding applications ranging from tactical aircraft to armoured vehicles to rugged industrial systems, with its rich complement of features and I/O including Intel Graphics, Integrated Platform Management Interface, Gigabit Ethernet, DIO, Serial channels, USB ports and more. Especially VPX3-C11 was designed to keep the pin compatibility with VPX3-C11, previous 6th Generation model in terms of I/O interface signal arrangement.

The SC6G0 series supports 4K60 hardware compression and UVC video output, with power options via PoE or USB Bus Power. Its built-in SoC delivers 2.5 AI TOPS, enabling seamless YOLO AI tool integration. This design streamlines system setup and connectivity, boosting flexibility and deployment efficiency across diverse AV applications.

Developed and manufactured by MPS Microsystems based on customer specifications, this lens actuator forms an essential component of a laser guidance system for unmanned flying objects. It enables 2 lens groups to be displaced individually over a total range of 48 mm and makes it possible to focus a laser over a distance of several kilometres. The main technical difficulty inherent to this actuator lies in meeting very stringent requirements for alignment between the two lens groups (< 10 µm) and in maintaining a very small tilt of the lenses over their entire stroke (lateral deviation < 2 µm). The key part making it possible to ensure such specifications is a frame machined by milling from an aluminium block, into which the 2 drive systems are fastened. These systems each consist of a Ø16 mm brushless motor and a Ø4 mm ball screw with an axial play of less than 5 µm. Backlash-free and frictionless sliding of the lens holders is ensured by standard L306 linear ball bearings manufactured by MPS Microsystems.

Supports non-destructive inspection of aircraft composite skin structures and is composed of a piezoelectric layer sensor, data acquisition equipment, and damage analysis software. Utilizes piezoelectric sensors to generate Lamb-wave and acquire signals, collecting data to accurately detect and assess composite damage. Visualizes inspection results on display such as damage location, size and index. - POD Accuracy: 1 inch 90% or more - POD Precision : Position error within 30 mm - 64 channels / 230 path reference detection time within 10 minutes - Sensor : Resonance resistance less than 400kΩ - Sensor : MIL-STD-810G - Sensor : RTCA DO-160 Section 23.0 - DAQ : x128 Piezoelectric sensor interface

Type : Axial (3P) Size(Ø, mm) : 230 × 87 Weight(kg) : 14 N. Speed(rpm) : 4500 N. Torque(Nm) : 75(Air)/85(Liquid) N. Power(kW) : 35(Air)/40(Liquid