Spring loaded High Frequency Micro-D Coax Connectors (MDHC) offer low VSWR up to 40 GHz (typ). These connectors have a constant 50 ohm airline impedance interface and are 30% smaller than our SCX coaxial connectors.

- Long life and precise movement control through fine-tuning - Shaft diameter 5mm~ - Accuracy G3~G7 - Shaft length differs depending on material, size, accuracy of shaft - Efficiency 85% or higher

The SWIFT-EI is the world’s first SWIR detector to feature a state-of-the-art read-out integrated circuit (ROIC), enabling low size, weight, power, and cost (SWaP-C). It supports VGA image format for SWIR imaging, multi-spot ALPD (asynchronous laser pulse detection), and a rapid imaging frame rate of up to 1,600 frames per second. The revolutionary ROIC introduces an independent neuromorphic imaging stream for event detection, which greatly expands capabilities in target detection and classification. Ideal for cutting-edge, low SWaP-C applications, the SWIFT-EI can be integrated into a variety of air platforms, missiles, vehicles, and handheld devices, making it extraordinarily versatile. With SWIFT-EI, SCD’s customers always have the advantage of being the FIRST TO SEE.

https://metals.bibus.com/kr-en/downloads/ Aerospace stock range Automotive Industry Certificate EN9120:2018 Declaration_RoHS-REACH-Conflict Minerals_Child_Labour EXHAUST SYSTEMS Fasteners Flyer Medical Applications Formulae for calculation General terms and conditions of purchase General terms and conditions of sale Medical Application Power Generation Stock Range Stock Program Asia and Europe Stock Range Aeropsace Thermal Processing Welding products

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

ElectroAir’s mobile APA-65 -series combined units consist of frequency converter units (AC rated output power up to 45 kVA) and rectifier units (DC continuous current up to 800A). These units are intended for the ground servicing of all aircraft types with a frequency of 400Hz and voltage 115/200 V and to power on-board electrical equipment and launch aircraft/ helicopters with a voltage of 28.5 VDC. APA-65 series is designed to eliminate CO2 emissions with its unique technical characteristics. Diesel hybrid unit and battery driven unit - unit can perform the complete service of aircraft at remote parking places with diesel engine / through batteries and it is also capable to operate from the 50/60Hz, 400V, 3 phase main power supply grid as any electrical GPU, without fuel consumption and with zero operating emissions. The range of different APA configurations with no emissions allow for safer, cleaner and more practical operational conditions for operators and personnel at the location. These units are very compact in size and weight.