KJF designed and fabricated A320 Sharklet Moving Line

The FICON was developed specifically for the K-11 Next Generation Rifle for the Korean Army. This system includes a laser range finder, uncooled infrared imaging and fuse timer for the 20mm air burst grenade round. Using the laser range finder, each unit is able to calculate the trajectory to which the grenade round must be fired in order to effectively hit the target. The computer automatically calculates a fuse time for the airburst grenade round. The hardware and software in the fire control unit do the work for the soldier. The soldier just has to point the gun where the sight tells him to and pull the trigger. Each unit is mounted directly onto the K-11 Rifle, and provides all the hard and software. There are both day and night optics in this sight, and each rifle has a human detection range of up to 500m.

DATASHEET GET NSP-7 In both land and maritime environments, gather actionable intelligence in all weather, day or night, from a turboprop-sized aircraft. HIGHLY CAPABLE MULTI-INT SAR/MTI RADAR The NSP-7 pod can be attached to an aircraft using MIL-Spec 14" lug mounts or via an adapter plate to the integral mounting points on the NSP-7 strongback rail.

The operation of robotic inspection systems in an industrial environment requires a reliable control station. The second generation integrated control station -ICS 2- gives operators an all-in-one tool. Supplied in a rugged hardshell case (Pelicase®), embedded components such as a 21.5-inch touchscreen, high-performance PC or joystick can be selected according to industry standards. It also boasts a 10-year spare parts guarantee as well as extreme robustness and reliability even in harsh environments. Simplicity and ease of operation were key when developing ICS 2. The operator connects the robotic platform with one single cable and using the integrated joystick, operation is simple and self-explanatory.

Humanoid Phantom for OTA testing of 5G and IoT The EM Phantom is a human body model that accurately reproduces the body's effect on electromagnetic radiation. Dielectric properties can be measured over a wide range of frequencies from below 10 MHz to over 100 GHz. Enables consistent over-the-air (OTA) evaluation of wireless devices in close proximity to the body. We provide Whole Body Phantom, Head Phontom, and Hand Phantom. FEATURES Measure dielectric properties over a wide range of frequencies from below 10 MHz to over 100 GHz Reproducible and consistent over-the-air (OTA) evaluation of wireless devices operating in close proximity to the body Human-like characteristics through detailed anatomy Mobile phone authentication according to CTIA OTA authentication standards Ideal for testing smart devices including hearing aids, glasses, VR, and contact lenses Drive/field testing of mobile phones under real network conditions Stable positioning and transport with dedicated low-loss stand Fully compliant with CTIA OTA certification standards and definitions of FCC SAR measurement guideline “FCC KDB 865664”

i3system’s line scanning X-ray detector platform, XID-C15DP/XID-C24DC, is a high performance and cost effective solution for dental panoramic, cephalometric applications. i3system’s direct type sensor ensures the most sharp images among the current products in the market. XID series is designed for compact size and easy installation. High DQE(Direct Quant㎛ Efficiency) enables high performance at lower dose of X-ray. Introduction Indirect type X-ray detector uses the scintillator and the photo-diode(CCD or CMOS sensor) for conversion of the X-ray into the light and for taking images espectively. But the light scatters and goes extinct during it passes through the scintillator and reaches to the CCD or CMOS sensor. As a result, it is inevitable to get blurred image. In the mean time, XID C15DP, direct type detector, converts X-rays into electronic signals directly without conversion process of light. Because X-ray is not converted into light, it provides much sharper images than indirect type detector. XID C15DP is designed to compact for easy installation. It provides Gigabit Ethernet port on the detector for easy configuration. Instead of Gigabit Ethernet, camera link or optical interface can be provided according to requirements of users.

The WP28015015UH(S) is a 15W gallium nitride (GaN) High Electron Mobility Transistor (HEMT). Features: Up to 15GHz Operation 14.0dB Typical Small Signal Gain at 4.7GHz 15W Typical PSAT at 4.7GHz High Efficiency Reliability Monitoring Supporting (Optional) 28V Operation Applications: U/VHF Amplifier Broadband Amplifiers Base Station Communications Drone, UAV WiMAX, LTE, WCDMA, GSM Radar Application