AI autonomous mission-performing drone - Drone performing autonomous defense/interception missions using Deep Reinforcement Learning technology - Drone platform for development (can be provided separately) - Drone H/W specifications

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

The engine offers a take-off power of up to 180 kW (235 hp). Excellent power-to-weight ratio. Small installation dimensions. Two outpu shaft speed configurations. Stable operation at high and low temperatures.

Features & Benefits: Drop-in enhancement for the T55-714A with very minor aircraft changes for deployment facility. Responsive to U.S. Army maintainer feedback, converting on lessons from current CH-47 engine. Upgrade Kit easily installed during overhaul.

AIM사의 는 항공 전용 풀 듀플렉스 스위치 이더넷으로 표준 이더넷 네트워크 기능 시험 및 시뮬레이션, 모니터링 분석용 기능을 제공합니다.

Illumia XAVA is an authoring and planning tool that enables trainers to create customized training content, including interactive learning materials, lecture materials with knowledge checks and AI-driven Q&A support.

This miniaturized system allows, depending on the desired configuration, to move very precisely between 1 and 3 sets of lenses over a stroke of several centimeters. The design has been optimized to ensure perfect alignment of the lenses and to minimize their tilt throughout the movement. This optomechanical system mainly consists of high-precision standard MPS and FAULHABER modules, such as brushless or stepper motors, ground ball screws with double nuts and linear ball bearings. It is particularly recommended for focusing a laser over a long distance, for example for the guidance of unmanned flying objects or for communication between flying objects. The number of lens sets, lens size and stroke can be configured at will.

- Inspection robot control and damage assessment for robot operators. - Pre-inspection information creation for inspection planning. - A 3D user interface for inspection robot status monitoring. - Damage assessment and result report generation capabilities.