Global Wideband Connectivity for Mission Success Honeywell’s JetWave MCX satellite communications system delivers the world’s most advanced high-speed SATCOM capabilities needed for the most demanding mission profiles. It enables global in-flight broadband data connectivity on nearly any Ka-band network – including Inmarsat’s Global Xpress (GX) network, Wideband Global SATCOM (WGS), and other commercial and military Ka-band networks – making it truly network-agnostic for the most extensive global coverage. Built on proven, high-speed JetWave technology, JetWave MCX utilizes a wider frequency band (29-31 GHz Tx and 19.2-21.2 GHz Rx), offering access to commercial and military Ka-bands globally. And the dual polarity configuration provides increased bandwidth in high-traffic areas while meeting high-data uplink requirements that military and government operators require. JetWave MCX is designed with “future-proofing” in mind, exceeding current connectivity requirements while enabling expanded customer connectivity needs in the future. For the unique requirements of military and government operators, JetWave MCX can enable a wide variety of mission-critical applications, such as en-route mission communications, real-time weather, in-flight video conferencing, large file transfer, in-flight mission planning and briefings, ISR video transmission, and secure communications. We offer specialized data packages for ISR missions, making use of the increased upload speed capabilities. Single-IP address network-switching capabilities enable seamless connectivity for users globally, while access to resilient modem waveforms offers additional security and jam-resistance in hostile environments. JetWave MCX’s high-bandwidth capabilities can transform the aircraft into an “airborne communications node” by receiving data simultaneously from multiple sources – such as UAVs or ground forces – then processing and amalgamating the data for airborne Command and Control or for transmission to ground control. No matter the mission profile, JetWave MCX offers the resiliency, bandwidth, and network-agnostic capabilities needed to enable mission success.

Product Description and Features 1. Usable Time: Approximately 4 hours 2. Breathable Coolant: Semi-permanent (reusable) 3. Oxygen cylinders and valves: Inspected by the Korea Gas Safety Corporation (KGS) 4. Materials: Outer fabric and PET material are heat-resistant. 5. Drain Button: A device for removing moisture depending on the usage time. 6. Supply Button: A device that temporarily provides a large amount of oxygen. 7. Facepiece: Includes a manual defrost for long-term use. 8. Electronic Pressure Indicator with IT Technology: Life-Saving Alarm (PASS) function, ambient temperature display, container pressure display, automatic alarm for low pressure (approximately 50 bar), usable time display, battery status display, and NFC-based personnel monitoring system (free software provided). 9. Accessories: Bone conduction communication equipment can be applied.

MPS Microsystems offers a complete range of high precision ball screws for positioning less than 5 µm. Mostly custom-made, these screws ensure smooth and uniform movement resulting from the high precision of their thread, achieved by grinding. Our ball screws are made exclusively of stainless steel and are fitted with double nuts to allow fine adjustment of the axial play. Moreover, an optional ogival thread can provide a higher static and dynamic load capacity. Thanks to a large number of options, we can ensure that the ball screw meets your technical and quality needs. The following parameters can be personalized: lubricant (grease, oil, dry lubrication, no lubrication), customized screw ends, shape and external dimensions of the nut and screw, multiple nuts on the same screw, left-hand thread, thread length, specific axial play, special surface treatment, and more.

The SCXMC-SFPDP is a high-speed optical communication card that operates through the XMC interface of the SBC. It is designed to transmit and receive large volumes of data between the SBC and other devices in real time. Unlike Ethernet, which can be difficult to synchronize, the SCXMC-SFPDP uses optical communication with synchronization signals, enabling precise and high-speed data transfer. It offers low response latency (<40 µs) and supports four transmit/receive channels at 3.125 Gbps per channel. A device driver program is required for operation, and the Linux driver can be downloaded from Seedcore’s product page. Drivers for other operating systems can be developed upon request. This module is deployed in the L-SAM multi-function radar system to ensure reliable real-time data transmission between mission-critical subsystems.

STERNA System accurately finds True North in virtually all terrains and regardless of the weather conditions. The performance of STERNA System is not disturbed by gear carried by its operator or if used next to heavy armored vehicles. It remains highly accurate even when deployed on reinforced concrete floors or in dense urban settings. STERNA System operates reliably even in GPS denied environments and does not require the operator to carry any support resources to determine True North. If your mission success depends on the highest level of accuracy and precision, there is no substitute for STERNA System.

EMCORE’s SDI170 IMU is designed as a performance-compatible inertial system that is form, fit, and functional with a legacy RLG-based IMU product, but with superior overall performance, versatility, and a significantly higher MTBF (Mean Time Before Failure) rating over ruggedized environments. The tactical performance of the SDI170 IMU is based on EMCORE’s mature, proven, dependable and accurate quartz MEMS inertial sensor technology in our SDI500 tactical-grade IMU. EMCORE’s quartz technology enables repeatable high-volume production of precisely machined sensor structures combined with the inherent large signal output and thermal stability of quartz materials. The SDI170 IMU is designed for demanding, mission-critical, rugged environments and ideal for continuous use applications with no wear-out components, highly linear accelerometer performance and longer life compared to competing alternatives. It is constructed with EMCORE’s latest generation quartz gyros, quartz accelerometers, and high-speed signal processing to achieve outstanding precision performance. The solid-state quartz sensors and hermetically sealed IMU construction provide reliable MTBF and a 20-year operating and storage life. Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection and flexible input power compatibility make the SDI170 IMU easy to use in a wide range of higher-order integrated commercial and defense system applications.

1. Certification Status Certified by the Korea Fire Institute (KFI) Certified under the latest KFAC (Korea Fire-fighting Apparatus Certification) CE certification currently in progress 2. Product Description Composition: Backrest, Facepiece, Cylinder Accessories: Auxiliary Mask, Bone Conduction Communication Device (facepiece- or headset-mounted), HUD, etc. 3. Features and Benefits -> Wide Full Face Mask: 360° curvature reduces blind spots. Medical-grade silicone minimizes skin irritation during long-term use. Equipped with a 360° rotating supply valve. -> Type-4 Containers: Internal PET liner prevents contamination. 20% lighter than Type-3 containers. Built-in Excess Flow Valve (EFV) protects against emergency damage in case of container breakage. -> IT-Integrated Backplate: Features a thermal imaging pressure indicator with TIC camera, PASS life-saving alarm, ambient temperature and height display, container pressure and remaining time, visual/audible alarms, Bluetooth connectivity, and NFC-based crew monitoring (entry/exit logs). Includes weight-distributing design and rapid charging function. -> Flexible Pricing: Various models are available with different features and price points, allowing selection based on individual needs.