Our products are used for manufacturing interior design components for civil and military aircraft construction. Sandwich structures are used in many areas of an aircraft (storage compartments, interiors, wings) to reduce weight. In order to structurally strengthen the honeycombs or insert them, they often have to be filled during the production process. Typical materials are one- and two-component epoxy resins with a very high proportion of hollow glass spheres. These require extremely gentle handling, as they would otherwise be destroyed, which in turn would result in an increase in density. Common application patterns are beads, circles, full surfaces and egde-filling. The job is often done manually, which results in long production times and high running costs due to material waste. Lack of reproducibility is just as problematic as the health hazard often posed by these media. The ViscoTec solution: Material is continuously fed to the dosing system by removal from a large container. With the help of a robot or axis system, suitable structures can be mapped reliably. A coordinated overall system delivers a dispensing result according to specification, in which operator interaction is reduced to a minimum.

Robotic technology that combines IoT and autonomous driving technologies provides key solutions for future mobility manufacturing. Main Functions Innovative manufacturing system using Collaborative Robot and Autonomous Mobile Robot ptimize production processes and provide logistics flexibility Ensuring Optimal Production Process Using AI Application Site HMGICs : Flexible Production Cells (smart manufacturing) Targeted to supply to global manufacturing sites

Features - Excellent waterproof performance with double sealing structure. - Beam expansion application technology application. - Can be applied to deep-sea environments. Application Area - ROV (Remotely Operated Vehicle) - Underwater Optical Communication - Renewable Energy - Underwater Drone

STX Engine produces medium speed engine driven power generation equipment that can satisfy customers 100% by ideally combining medium speed engines, which have been collectively produced at our Changwon factory since obtaining licenses from the mid 1970's from MAN ENERGY SOLUTIONS in Germany and NIIGATA POWER SYSTEM in Japan, with a power generation system designed with rich experience in the area of system engineering. By installing diesel engine power generation equipment in locations across Korea and overseas, such as on islands, remote areas, resorts, etc., where no public power supply is available, as well as industrial complexes and hospitals which require good source of power, and factories receiving expensive public power supply, etc., our customers can confirm the investment effect within a short period of time after experiencing the power supply we make available to them, as well as low installation and operation costs and maximized availability of the equipment.

- Interior lighting used by removing it from the upper cockpit mount - Adjust the DIM/BRT brightness by operating the knob switch - NVIS WHITE per MIL-STD-3009

The fully redundant DA 30-HT-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The position sensor features a three channel design (for 2 out of 3 voting). Additionally, there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485.

A VGA (640×480) LWIR (8–12 µm) uncooled micro-bolometer module with 12 µm pixel pitch and NETD ≤ 50 mK, paired with an F1.0, 10.7 mm EFL lens delivering H42° / V31.5° / D52.5° FOV. It streams at 30 Hz in either UVC (USB-C, 5 V) or GMSL1 (FAKRA, 12 V), with power consumption < 1.9 W. The compact, lightweight housing (30×30×58.9 mm for UVC; 30×30×70.9 mm with FAKRA for GMSL1; IP65; −40 °C to 85 °C) makes it well-suited for autonomous vehicles, UAVs, and security systems, providing reliable day/night thermal perception of pedestrians, animals, and objects in adverse weather.

Official Korean Distributor and Licensee of Parker Velcon, offering industrial filter systems and filter cartridges Filter vessels and elements (cartridges): Filter/separator vessel and cartridge, Moisture-absorbing Aquacon filter vessels and cartridges; Micronic filter vessels and cartridges (0.5 Micron to 25 micron), Natural Gas filter vessels and cartridges; etc.