The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

Revolutionary DFOG Technology Boreas takes Fibre Optic Gyroscope (FOG) technology into the next generation with new, patent-pending Digital FOG (DFOG) technology, developed over 25 years with 2 research institutions. This revolutionary DFOG technology combines a specially designed closed-loop optical coil with advanced spread spectrum digital modulation techniques that have never been used in a FOG before. The resulting DFOG offers dramatically improved accuracy, stability, and reliability with significantly reduced size, weight, power, and cost.

To reduce aircraft development lead-time, Safran Engineering Services is specialized in quick design and engineering in full autonomy. Teams provide global loads for ground and flight maneuvers, follows the evolution of weight and center of gravity for aircraft components and support sales campaigns with weight & balance evaluation.

At #Honeywell, we're transforming the way the world works through technology and software. Learn about our legacy of firsts spanning 130 years, from our #fut...

This solution follows a three-step process of input, processing, and output, utilizing imagery, DEM, AT, and spatial data to refine 3D models. The editing-based texturing function allows users to correct shape errors, occlusions, and distortions, while the automated texturing ensures consistency and accuracy through advanced geometric matching. Final outputs are stored in standard formats for broad practical applications.

ㅇKey Features RF Front-End - Frequency : C-Band - Tx Power : +27 dBm(0.5 W) , Rx Range : -10 ∼ -100 dBm - Rx Sensitivity : -95 dBm@2 MHz Baseband & Modem - Downlink : 2.4 Mbps / Uplink: 8 kbps - QPSK waveform and CTC Forward Error Correction Anti-Jamming / Anti-Spoofing / Video CODEC - Anti-Jamming Capability using DSSS - Anti-Spoofing Capability by AES-256/ ARIA-256 Encryption - Support H.264 / up to 1920x1080x30f Interface - 10/100 Base-T Ethernet x1, RS-422 x1, RS-232 x2 - 3G-SDI Digital Video IN/OUT Interface - Limited Discrete I/O (1PPS/sync_in, reset_in, status_out) ㅇQuality and Certification - MIL-STD-810G - MIL-STD-461F

Hermetic connectors are essential to maintain system integrity in applications where the reliability and performance of electrical connections is critical, such as gas-tight barriers or high-pressures differentials.

PELICAN-D JT is a MWIR detector for missile applications. The FPA is InSb based, having digital Readout Integrated Circuit (ROIC) in a format of 640 x 512 with 15μm pitch. Pelican-D JT has a unique structure of Dewar which enables very fast cool down time and hence quick mission readiness using Joule-Thomson (JT) cooler. Due to the low heat load on the focal plane, the detector achieves long mission duration. The Detector can be supplied with a proximity board which provides Camera Link interface to the customer system. This highly simplifies the integration of the detector to the system.